Skip to product information
1 of 1

Community R2-52MAX 3-Way Dual 12" High Output Weather-Resistant Speaker

Community R2-52MAX 3-Way Dual 12" High Output Weather-Resistant Speaker

SoundPro Item: 23795 | Part Number: 930-10906-00001

Regular price $6,998.00
Regular price $6,998.00 Sale price $6,998.00
Your Price Sold out
MSRP: $6,998.00 | MAP: $6,998.00

Usually ships in 5-7 business days

  • Signal-Aligned Passive MF/HF Horn Coaxially Mounted For Coherent Coverage
  • Dual Neodymium 12" LF Drivers With Aluminum Demodulation Ring For Low Distortion
  • High-Sensitivity HF Compression Driver Delivers Extended Balanced Frequency Response
  • Three-Layer Weather-Stop Grille Enables Continuous Outdoor Exposure Without Covers
  • Biamp Operating Mode With Passive MF/HF Crossover Maximizes Driver Headroom
  • IP55 And MIL-STD-810G Ratings Confirm Verified Environmental Sealing
  • TAA Compliant Construction Qualifies For GSA Schedule Federal Procurement Bids

The Community R2-52MAX is built for touring engineers, systems integrators, and permanent install teams who need premium full-range performance at very high output levels in demanding outdoor or indoor venues. Its three-way biamp architecture — with dual 12-inch neodymium LF drivers, dual M200HP midrange compression drivers, and a high-sensitivity HF compression driver — delivers the output and intelligibility required for modern sports venues, large-scale festivals, and houses of worship where both music reproduction and speech clarity are non-negotiable.

Where single-driver or two-way point source systems fall short under sustained high-SPL conditions, the R2-52MAX maintains headroom through driver-level efficiency rather than brute-force amplification. The passive MF/HF horn coaxially mounts in front of the electronically signal-aligned LF section, ensuring coherent wavefront reconstruction across the 50° x 20° coverage pattern. This alignment approach reduces comb filtering artifacts that plague conventional stacked configurations in reverberant stadium environments.

The hand-laminated multilayer fiberglass enclosure with three-layer Weather-Stop grille construction allows indefinite direct outdoor exposure without protective covers or temporary sheltering — a real operational advantage for permanent installs and touring rigs in unpredictable climates. TAA compliance makes the R2-52MAX eligible for GSA Schedule procurement, opening federal government and institutional bid opportunities for integrators. Community recommends pairing with the ALC-1604D loudspeaker controller or higher-power ALC models for optimized system performance.

Downloads

View full details

Specifications

Certifications
IP Rating
IP55 per IEC 60529
Environmental Standard
Conforms with MIL-STD-810G
TAA Compliant
Yes
Warranty
5 Years
Dimensions
Height
24.75" (629 mm)
Width
24.75" (629 mm)
Depth
30.75" (781 mm)
Weight
Product Weight
122 lbs (55.3 kg) with included mounting yoke
Audio
Operating Range
71 Hz - 19.5 kHz
Maximum SPL
135 dB (141 dB Peak)
LF Sensitivity
103 dB
MF/HF Sensitivity
109 dB
LF Impedance
MF/HF Impedance
Nominal Beamwidth (H x V)
50° x 20°
Operating Mode
Biamp with DSP (Passive MF/HF)
Loudspeaker Type
3-way, full-range, weather-resistant
Power
LF Power (Continuous)
1200W
LF Power (Peak)
4800W
MF/HF Power (Continuous)
350W
MF/HF Power (Peak)
1400W
Recommended Amp Power LF
1200W - 2400W @ 8 ohms (98V - 139V)
Recommended Amp Power MF/HF
350W - 700W @ 8 ohms (53V - 75V)
Connectivity
LF Drivers
2 x 12" inherently weather-resistant cones, 3" voice coil, neodymium motor, aluminum demodulation ring
MF Drivers
2 x 2" exit M200HP compression, 3.5" diaphragm, 2.2" voice coil, high temp non-metallic diaphragm
HF Driver
1 x 1" exit compression, 1.7" voice coil, demodulation ring, ketone polymer diaphragm
Construction
Enclosure Material
Hand-laminated multilayer fiberglass with paintable light grey gel-coat (RAL 7038)
Grille
3-layer Weather-Stop with polyester mesh, foam, zinc-rich epoxy dual-layer powder-coated perforated steel
Finish
Grey RAL 7038
Mounting
5 x 1/2"-13 threaded rigging points; steel zinc-rich epoxy dual-layer powder-coated bracket with 2 aluminum aiming straps
Environmental
Operating Environment
Indoor / Continuous outdoor direct exposure
Identifiers
Alternate MPN
R2-52MAX
Alternate MPN 2
911.1274.900

Why Choose SoundPro?

Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.

  • Certified Account Managers

    Our Account Managers, with 16+ industry certifications, are ready to find your solution.

  • Personalized Pricing

    We know every project is unique. Get a personalized quote anytime you need it

  • Fast Shipping & Local Pickup

    In stock items ship same day if ordered by 4pm CST. Pickup offered in Irving, TX.

  • Accountability from Real People

    We aim for a smooth, transparent experience by setting and sticking to clear expectations.

  • Easy Payments & Financing

    We accept all major credit cards and also offer financing through our partners.

1 of 2