
Specifications
Dimensions
Available Lengths
16, 28, and 43 cm
Microphone Diameter
5.7 mm (0.22 in)
Electrical
Distortion, THD < 1% - Legacy
122 dB SPL RMS, 125 dB SPL peak
Distortion, THD < 1% - CORE
130 dB SPL RMS, 133 dB SPL peak
Minimum Load Impedance
2 kΩ
Audio
Frequency Response
20 Hz - 20 kHz
Sensitivity, Nominal, ±3 Db at 1 Khz
16 mV/Pa; -36 dB re. 1 V/Pa
Dynamic Range - Legacy
Typ. 102 dB
Dynamic Range - CORE
Typ. 110 dB
Connectivity
Connector
XLR
Construction
Available Colors
Black, white
Environmental
Temperature Range
-40°C to 45°C (-40°F to 113°F)
Shipping
Weight
47 cm
General
Directional Pattern
Supercardioid
Principle of Operation
Pressure gradient
Cartridge Type
Pre-polarized condenser
Effective Frequency Range ±2 Db, at 20 Cm (7.9 in)
100 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz and permanent 2nd order low-cut filter at 80 Hz
Equivalent Noise Level, A-weighted
Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equivalent Noise Level, ITU-R BS.468-4
Typ. 35 dB (max. 38 dB)
Max. SPL, THD 10%
135 dB SPL peak
Rated Output Impedance
From XLR connector or DAD6001-BC XLR Adapter: 100 Ω
Cable Drive Capability
Up to 100 m (328 ft)
Output Balance Principle
Signal balanced with XLR connector or DAD6001-BC XLR Adapter
Common Mode Rejection Ratio (CMRR)
> 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
Power Supply (for Full performance)
Up to 100 m (328 ft)
Current Consumption
Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
20 Cm (8 in)
75 g (2.6 oz)
32 Cm (13 in)
80 g (2.8 oz)
Polarity
+V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001-BC XLR adapter)
Relative Humidity (RH)
Up to 90%
Why Choose SoundPro?
Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.