
- Available colorsBlack, white
- Available lengths16, 28, and 43 cm
- Directional patternSupercardioid
- Principle of operationPressure gradient
- Cartridge typePre-polarized condenser
- Frequency response20 Hz - 20 kHz
- Effective frequency range ±2 dB, at 20 cm (7.9 in)100 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz and permanent 2nd order low-cut filter at 80 Hz
- Sensitivity, nominal, ±3 dB at 1 kHz16 mV/Pa; -36 dB re. 1 V/Pa
- Equivalent noise level, A-weightedTyp. 23 dB(A) re. 20 µPa (max. 26 dB(A))
- Equivalent noise level, ITU-R BS.468-4Typ. 35 dB (max. 38 dB)
- Distortion, THD < 1% - Legacy122 dB SPL RMS, 125 dB SPL peak
- Distortion, THD < 1% - CORE130 dB SPL RMS, 133 dB SPL peak
- Dynamic range - LegacyTyp. 102 dB
- Dynamic range - CORETyp. 110 dB
- Max. SPL, THD 10%135 dB SPL peak
- Rated output impedanceFrom XLR connector or DAD6001-BC XLR Adapter: 100 Ω
- Minimum load impedance2 kΩ
- Cable drive capabilityUp to 100 m (328 ft)
- Output balance principleSignal balanced with XLR connector or DAD6001-BC XLR Adapter
- Common mode rejection ratio (CMRR)> 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
- Power supply (for full performance)Up to 100 m (328 ft)
- Current consumptionTyp. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
- ConnectorXLR
- Weight
- 20 cm (8 in): 75 g (2.6 oz)
- 32 cm (13 in): 80 g (2.8 oz)
- 47 cm
- Microphone diameter5.7 mm (0.22 in)
- Polarity+V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001-BC XLR adapter)
- Temperature range-40°C to 45°C (-40°F to 113°F)
- Relative humidity (RH)Up to 90%
Why Choose SoundPro?
Since 1973, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.