
Specifications
Directional pattern
Supercardioid
Principle of operation
Pressure gradient
Cartridge type
Pre-polarized condenser
Frequency response
20 Hz - 20 kHz
Effective frequency range ±2 dB, at 12 cm (4.7 in)
100 Hz - 16 kHz. Permanent 1st order low-cut filter at 40 Hz, Selectable 2. order low-cut at 80 Hz
Sensitivity, nominal, ±3 dB at 1 kHz
5 mV/Pa; -46 dB re. 1 V/Pa
Equivalent noise level A-weighted
Typ. 23 dB(A) re. 20 µPa (max. 25 dB(A))
Distortion, THD < 1%
143 dB SPL RMS, 146 dB SPL peak
Dynamic range
Typ. 123 dB
Max. SPL, THD 10%
149 dB SPL peak
RF Frequency Range
470 - 870 MHz (Varies by region)
RF Tuning Steps
25 kHz
Battery Runtime at 10 mW
>7 hours
Audio Input Impedance
10 kΩ
RF Sensitivity
-96 dBm at 10^-5 BER
Audio Polarity
Positively increasing sound pressure produces positive going voltage on relevant audio outputs
Radio Frequency Power
1 mW, 5 mW, 10 mW, 20 mW, 50 mW (follows region)
Working Range
100 m (330 ft) Range depends on the RF enviroment, i.e. absorption, reflection and interference
Audio Dynamic Range (system) analog
126 dB
Audio Dynamic Range (system) Digital
126 dB
Audio Frequency Response
20 - 20 kHz (±1 dB)
Latency
<2.9 ms
Audio Input Interface Type
SL1
Radio Frequency Bandwidth
470 - 870 MHz (follows region)
Housing Type
Zink alloy
Operating Temperature
-10°C to 50°C (14°F to 122°F)
Storage Temperature
-20°C to 50°C (4°F to 122°F) Without batteries installed
Digital Audio Trim
-20 dB to +40 dB on the receiver side, selectable in increments of 1 dB
Occupied Bandwidth
< 200 kHz
Battery Type
LR6 AA batteries
Weight
373 g (13.2 oz)
Microphone diameter
48 mm (1.9 in)
Capsule diameter
17 mm (0.67 in)
Microphone length
266 mm (10.5 in)
Polarity
+V at output for positive sound pressure
Why Choose SoundPro?
Since 1973, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.