• Dynacord IPX10:4 DSP Power Amplifier
1 1

Dynacord IPX10:4 DSP Power Amplifier

Dynacord IPX10:4 DSP Power Amplifier

SoundPro Item: 11833 | Part Number: F.01U.329.712

$10,820.00
$10,820.00 $10,820.00
Your Price Sold out
MSRP: $10,820.00 | MAP: $10,820.00

In stock and ready to ship

  • 4 x 2500 W multi-channel installation DSP amplifier with digitally controlled PFC supply
  • Fully integrated DSP with high-resolution 96 kHz processing and FIR Drive
  • Dante and OCA integration via OMNEO with fallback options
  • Parallel, bridged and parallel-bridged drive modes with 70/100V/140V/200V and low impedance operation
  • High efficiency Eco Rail technology for lower operating costs
Log in or register for YOUR best price

Dynacord’s IPX10:4 is a dedicated amplifier for fixed install applications that require high power multichannel amplifiers with sophisticated speaker processing.

IPX series are dedicated amplifiers for fixed install application such as stadiums, arenas, houses of worship, concert halls, theaters and other applications that require high-power multichannel amplifiers with sophisticated speaker processing. The integrated DSP can run either in 48 kHz or true 96 kHz including FIR Drive. Besides analog inputs also Dante and OCA via OMNEO network inputs are available. Comprehensive fallback options allow redundant scenarios.

Each channel can be individually operated in low impedance mode, or 70V/100V Direct Drive mode. By bridging also 140V/200V Direct Drive is available. By the possibility to parallel two channels and parallel-bridge four channels all kind of loudspeakers can be driven.

Due to the digitally controlled interleaved PFC supply reliable operation is ensured even under challenging mains supply situations. Reactive current is limited to a minimum, which reduces costs for mains installations and mains fusing in the installation.

In case of idle mode or light mode operation IPX series amplifiers automatically switch to a lower Eco Rail further reducing operating costs. In Eco Mode the amplifiers stay fully functional and supervised.

While IPX series amplifiers are fully integrated in IRIS-Net, an OLED display on the front panel allows quick local control and supervision of the amplifier.

The connectivity of IPX series amplifiers is optimized for fixed install applications.

View full details

Specifications

Dimensions
Dimensions (WxHxD)
19.02" x 3.47" x 20.24"
Electrical
Max. Output Voltage (normal Mode, per channel)
150 V peak
Max. Output Current (normal Mode, per channel)
53A peak
Low-Zmode, max. Output Voltage
10.7 dBu (2.66 V), adjustable -1.3-22.7 dBu
THD (3dB Below Max, AES17, 1kHz)
<0.05%
Rated Power Consumption (see BTU table)
1200W
Power Requirements
100 V to 240 V, 50 Hz to 60 Hz AC
Power Supply Topology
Switching Mode Power Supply with digital controlled Power Factor Correction
Audio
Frequency Response (ref. 1kHz, Analog in to Speaker out)
20 Hz to 20 kHz (±0.5 dB)
Speaker Output
1 x 8-pin Euroblock, 6 mm, female
Connectivity
Output Stage Topology
Class D, fixed frequency
A-weighted, Analog Input
112dB
A-weighted, Digitial Input
115dB
A-weighted, Digital Input
< -73 dBu
1/8 Max. Output Power at 4Ω
1765W
Idle Mode (no Input signal)
80W
Dante Network Latency
typ. 1 ms
Mains Input
1 x Neutrik powerCON-HC
Environmental
Ambient Temperature Limits
40°F to 105 °F (5 °C to 40 °C)
IEC Protection Class
Class I (grounded)
Shipping
Weight
33 pounds
General
Amplifier Channels
4
Low-Z Mode, ref. 1 Khz
32 dB, adjustable 20-44 dB
Direct Drive Mode
33.2/36.2/39.2/42.2 dB for 70/100/140/200 V
DIM 100 (3.15kHz, 15kHz)
<0.15%
IMD-SMPTE (60Hz, 7kHz)
<0.05%
Crosstalk (ref. 1kHz, 12dB Below Max, 8Ω
< -80 dB
Damping Factor (20Hz to 200Hz, 8Ω)
>400
Connectivity
Analog Audio Input/Thru, Network, GPIO Control Port
Standby Mode
<16 W
Sampling Rate
48 kHz/96 kHz, OMNEO/Dante synchronized
Signal Delay/Latency (analog in to Speaker Out, 48kHz, 96kHz)
0.70ms/0.53ms
User EQ
12 filters per channel, selectable as PEQ, Lo-Shelv, Hi-Shelv, Lo-ShelvQ, Hi-ShelvQ, Hi-Pass, Lo-Pass and Notch; 2 filters of them with additional asymmetric filter type
User Delay
0 to 2000 ms per channel (units: µs, ms, s, cm, m, inches, feet)
Array EQ
5 filters per channel, selectable as PEQ, LoShelv, Hi-Shelv, Lo-ShelvQ, Hi-ShelvQ, Hi-Pass, Lo-Pass, and All-Pass
Array Delay
0 to 500 ms per channel (units: µs, ms, s, cm, m, inches, feet)
Speaker EQ
10 filters per channel, selectable as PEQ, Lo-Shelv, Hi-Shelv, Hi-Pass, Lo-Pass and All-Pass
Speaker X-Over
Hi-Pass, and Lo-Pass per channel, 6/12/18/24/30/36/42/48 dB Bessel/Butterworth, 12/24/48 dB Linkwitz-Riley; Alignment Delay, 0 to 20 ms per channel
Speaker FIR
up to 1025 taps, Linear Phase Filter, Linear Phase Brickwall X-Over
Speaker Limiters
Peak Anticipation Limiter and RMS/TEMP Limiter per channel
Other Functions
Source Selection and Mix, Level, Mute, Polarity, Sine and Noise Generator, Pilot Tone Generator and Detection, Level Meters, Impedance Measurement and Load Monitoring
DSP Presets
1 Factory + 20 User
Speaker-Pool Presets
30 speaker settings
Source Supervision and Fallback
Pilot Tone supervision at Analog and OMNEO/Dante inputs, switchover to alternative Source Selection
Front Panel Indicators
4x status LEDs (power, standby fault, omneo)
Front Panel Operating Elements
3 buttons (up, enter, down)
Rear Panel Indicators
1x status LED (status)
Rear Panel Operating Elements
mains switch
Protections
Audio Limiters, High Temperature, DC, HF, Short Circuit, Back-EMF, Peak Current Limiters, Inrush Current Limiters, Turn-on Delay, Mains Circuit Breaker Protection, Mains Over/Under Voltage Protection
Cooling
front-to-rear, temperature controlled fans, supervised
Electromagnetical Environment
E1, E2, E3
Indicators
Display
black/white OLED 256x64 pixel

Why Choose SoundPro?

Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.

Start Shopping

  • Certified Account Managers

    Our Account Managers, with 16+ industry certifications, are ready to find your solution.

  • Personalized Pricing

    We know every project is unique. Get a personalized quote anytime you need it

  • Fast Shipping & Local Pickup

    In stock items ship same day if ordered by 4pm CST. Pickup offered in Irving, TX.

  • Accountability from Real People

    We aim for a smooth, transparent experience by setting and sticking to clear expectations.

  • Easy Payments & Financing

    We accept all major credit cards and also offer financing through our partners.

1 2