
Specifications
Electrical
THD+N (1/8 RATED OUTPUT POWER, 1 KHZ)
< 0.1%
Power Requirements
100V to 240V, 50 Hz to 60 Hz AC
Audio
Output Power
4Ω / 8Ω / 70V / 100V
Nominal Gain
(+6 dBu input sensitivity, LEVEL 0 dB): 27.0 dB / 30.0 dB / 33.2 dB / 36.2 dB
Connectivity
Total Rated Output power[1]
600W
Rated Output power[1]
2 x 300W
Maximum Output Power per Channel (power sharing)
500W / 600W / 500W / 600W
Loudspeaker Output
2 x 4-pin Euroblock, 5.08 mm, female
Control Port Type
1 x 5-pin Euroblock, 3.81 mm, male
Idle Mode (ecoRAIL with No Input signal)
< 12W
Consumption at 1/8 Rated Output Power
115W
General
AMPLIFIER
4Ω / 8Ω / 70V / 100V, Signal to Noise Ratio (A-weighted, ref. to rated output power, LEVEL 0 dB): > -100 dB / > 102 dB / > 101 dB / > 103 dB
Type
1 x 6-pin Euroblock, 3.81 mm, male, parallel 1x RJ45 (AES72-1E)
Signal Processing
Input Routing, Filter (24 dB/Oct.), Hi-pass 30/50/100/150 Hz, Lo-pass 150 Hz, Peak Limiter
Standby Mode (APD active)
< 1W
Protections
Audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak current limiters, inrush current limiters, mains over/under voltage protection
Notes
[1] Test signal for max. output power according IHF-A-202 (Dynamic-Headroom, burst 1 kHz / 20 ms on / 480 ms off / low level -20 dB)
RF
Number of Channels
2
Why Choose SoundPro?
Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.