
Specifications
Dimensions
Dimensions (WxHxD)
19.02" x 3.47" x 20.24"
Electrical
Max. Output Voltage
210V peak
Max. Output Current
84A peak
Voltage Gain ref.1 Khz
32.0 dB, adjustable 24-40 dB
Input Sensitivity ref. to Max. Output Voltage
13.7 dBu (3.73 V), adjustable 5.7-21.7 dBu
THD 3 Db Below Max., AES17, 1 Khz
< 0.05 %
Power Requirements
100 V to 240 V, 50 Hz to 60 Hz AC
Rated Power Consumption
2250 W
Power Supply Topology
Switching Mode Power Supply with digital controlled Power Factor Correction
Connectivity
Output Stage Topology
Class D, fixed frequency
Dante Network Latency
typ. 1.00 ms
1/8 Maximum Output Power at 4 Ω
2850 W
Idle Mode (no Input signal)
110 W
Environmental
Ambient Temperature Limits
40 °F to 105 °F (5 °C to 40 °C)
IEC Protection Class
Class I (grounded)
Shipping
Weight
33 pounds
General
2Ω
5200W
2.7Ω
6000W
4Ω
5000W
8Ω
2500W
Amplifier Channels
4
IMD-SMPTE, 60 Hz, 7 Khz
< 0.15 %
DIM100, 3.15 Khz, 15 Khz
< 0.15 %
Amplifier
Crosstalk ref. 1 kHz, 12 dB below Max., 8 Ω: < -80 dB, Frequency Response ref. 1 kHz, analog in to speaker out: 20 Hz to 20 kHz (±1 dB), Damping Factor, 20 Hz to 200 Hz, 8 Ω: > 400, Signal to Noise Ratio, Output Noise
Sampling Rate
48 kHz/96 kHz, OMNEO/Dante synchronized
Digital Signal Processing
Signal Delay/Latency, Memory
Signal Processing
32/40 bit, floating point
User EQ
12 filters per channel, selectable as PEQ, Lo-Shelv, Hi-Shelv, Lo-ShelvQ, Hi-ShelvQ, Hi-Pass, Lo-Pass & Notch; 2 filters of them with additional asymmetric filter type
User Delay
0 to 2000 ms per channel (units: μs, ms, s, cm, m, inches, feet)
Array EQ
5 filters per channel, selectable as PEQ, Lo-Shelv, Hi-Shelv, Lo-ShelvQ, Hi-ShelvQ, Hi-Pass, Lo-Pass, & All-Pass
Array Delay
0 to 500 ms per channel (units: μs, ms, s, cm, m, inches, feet)
Speaker EQ
10 filters per channel, selectable as PEQ, Lo-Shelv, Hi-Shelv, Hi-Pass, Lo-Pass, & All-Pass
Speaker X-Over
Hi-Pass & Lo-Pass per channel, 6/12/18/24/30/36/42/48 dB Bessel/Butterworth,12/24/48 dB Linkwitz-Riley; AlignmentDelay, 0 to 20 ms per channel
Speaker FIR
up to 1025 taps, Linear Phase Filter, Linear Phase Brickwall X-Over
Speaker Limiters
Peak Anticipation Limiter & RMS/TEMP Limiter per channel
Other Functions
Source Selection & Mix, Level, Mute, Polarity, Sine & Noise Generator, Level Meters, Impedance Measurement, & Load Monitoring
Connectivity
Analog Audio Input/Thru, Digital Audio Input/Thru, Network
Front Panel Indicators
Full color LED illuminated ring
Front Panel Operating Elements
Rotary encoder, Capacitive Touch Screen
Rear Panel Indicators
2 x LED (AES3 Input mode active, Amp-Find)
Rear Panel Operating Elements
mains switch
Standby Mode
< 19 W
Protections
Audio Limiters, High Temperature, DC, HF, Short Circuit, Back-EMF, Peak Current Limiters, In rush Current Limiters, Turn-on Delay, Mains Circuit Breaker Protection, Mains Over/Under voltage Protection
Cooling
Front-to-rear, temperature controlled fans, supervised
Electromagnetical Environment
E1, E2, E3
Indicators
Display
320 x 240 pixel, 3.5" color TFT"
Why Choose SoundPro?
Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.