
Specifications
Dimensions
Dimensions (HxWxD)
524x355x355mm (20.7x14x14")
Weight
Shipping Weight
10.5 kg (23 lb)
Electrical
Maximum Input Voltage
28.0 V
Minimum Impedance
6.6Ω at 9.5kHz
Audio
Power Rating
240 W Continuous Program (2 hrs), 120W (480W peak), Continuous Pink Noise (2 hrs), 100W (400W peak) Continuous Pink Noise (100 hrs)
Transformer Taps
70V: 60W, 30W, 15W & 7.5W 100V: 60W, 30W, 15W
Sensitivity
87 dB, 1W @ 1m (ave. 80Hz - 16kHz)
Coverage Angle
360° horizontal, 160° vertical (primary listening 10° to 50° up from ground).
Maximum SPL (1m)
108 dB
Impedance
8Ω (at 8Ω setting)
Crossover Type
2nd Order LPF on LF and 2nd Order HPF on HF
Connectivity
Input Connectors
Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section)
Construction
Enclosure
LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.
Grille
Powder coated stainless steel.
Colors
Hunter Green, RAL6018
General
Frequency Range (-10dB)
47 Hz – 16 kHz
Frequency Response (±3 dB)
60Hz - 15 kHz
Directivity Factor (Q)
2.1
Directivity Index (DI)
3.2 dB
Insertion Loss
<0.5 dB at any tap setting
Thru Setting
8Ω nominal
Recommended Protective High-Pass
45 Hz for 8Ω operation, 24 dB/oct 80 Hz for 60W tap, 24 dB/oct 50 Hz for 30W, 7.5W, and 7.5W taps, 24 dB/oct
LF
200 mm (8.00 in) diameter LF driver, Kapton™ former, 38mm (1.5 in) voice coil, polypropylene cone and polyurethane surround.
HF
25mm (1.0 in) diameter HF driver Polyetherimide (PEI) dome.
Outdoor Capability
IP-56 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.
Safety Agency
UL1480, Transformer UL Recognized per UL1876, ROHS compliant.
Net Weight (each)
7.8 kg (17 lb)
Installer-Supplied Required Tools
22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.
Mechanical
Wiring
Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For Installation instructions, see Installation Guide (#IS-C80MLS).
Why Choose SoundPro?
Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.