Skip to product information
1 of 4

Listen Technologies LR-4200-072 Intelligent DSP RF Receiver | 72 MHz

Listen Technologies LR-4200-072 Intelligent DSP RF Receiver | 72 MHz

SoundPro Item: 17288 | Part Number: LR-4200-072

Regular price $209.00
Regular price $239.00 Sale price $209.00
Your Price Sold out
MSRP: $239.00 | MAP: $209.00

Usually ships in 5-7 business days

  • Best-In-Class RF Sensitivity With 20dB Lower Noise Floor Ensures Consistent Reception In Challenging Environments
  • Integrated Neck Loop And DSP Loop Driver Eliminate External Accessories For T-Coil Hearing Aid Users
  • Rechargeable Lithium-Ion Battery Delivers Eight Hours Runtime With 2.5 Hour Full Charge Cycle
  • Dual Output Jacks Support Shared Listening Or Connection To Body-Worn Induction Loops
  • OLED Display Presents Channel Assignment And Battery Status Without Staff Intervention
  • Free iDSP Software Enables Centralized Programming And Inventory Management Across Receiver Fleets
  • Field-Replaceable Battery Design Extends Lifecycle And Reduces Total Cost Of Ownership

The LR-4200-072 receiver brings intelligent DSP technology to professional assistive listening installations requiring dependable RF performance and extended runtime. Engineered with best-in-class RF sensitivity and 20dB lower noise floor than competing receivers, this unit serves boardrooms, lecture halls, courtrooms, and worship spaces where speech intelligibility cannot be compromised. The integrated neck loop and DSP loop driver optimize magnetic coupling for T-coil-equipped hearing aids, eliminating the need for external accessories that add cost and complexity to AV installations.

Advanced lithium-ion battery technology provides eight hours of continuous operation and recharges fully in 2.5 hours via standard micro USB connection. The OLED display presents channel assignment, volume level, and charge status at a glance, reducing support calls and venue staff intervention. Dual 3.5mm output jacks enable shared listening or connection to body-worn audio induction loops. Free iDSP software supports centralized programming, inventory tracking, and firmware management across receiver fleets. Field-replaceable battery design extends lifecycle and reduces total cost of ownership for integrators managing ADA compliance programs.

Operating across 72-76 MHz with 17 wideband and 40 narrowband channel options, this receiver pairs with Listen Technologies stationary transmitters for fixed installation or tour guide systems. Programmable squelch and automatic RF loss detection maintain connection integrity in challenging RF environments. The ultra-compact form factor simplifies dispensing workflows and storage in charging cases while meeting the ergonomic needs of extended-wear users.

Downloads

View full details
  • Audio
    • System Distortion: < 2% total harmonic distortion (THD) at 80% deviation
    • Output(s): Two (2) 3.5 mm (0.14 in.) connectors, unbalanced, 0 dBu nominal output level, 16 mW maximum, impedance 32 ohm
    • System Frequency Response: 50 Hz - 15 kHz (±3 dB)
    • System Signal to Noise Ratio: SQ enabled 80 dB, SQ disabled 60 dB
  • Controls
    • User Controls: Power, up/down volume
    • Programming: Via software and USB port
    • Set-up Controls: Press and hold up/down volume buttons for 5 seconds to enter channel adjust, use up/down to select channel
  • Indicators
    • LEDs: Flashes when batteries are low or to indicate charging, solid when fully charged
    • Display: Channel designation, battery level, unit number, charging status
  • RF
    • Frequency Range: 72.0250 - 75.9500 MHz
    • Number of Channels: 17 wide band, 40 narrow band
    • Sensitivity: .6uV typical, 1 uV maximum for 12 dB sinad
    • Frequency Accuracy: ± .005% stability 32 to 122 ºF (0 to 50 ºC)
    • Squelch: Programmable in 20 steps, automatic on loss of RF signal
    • Antenna Type: Uses ear phone/neck loop lanyard and short ear phone cable or standard earphone cable
  • Power
    • Power Supply: Micro USB connector, 5 V, 500 mA
    • Battery Type: Lithium Ion 3.7 Vdc, 1200 mAh
    • Battery Life: 8 Hours of continuous use
    • Battery Charging Time: Fully charged in 2.5 Hours
  • Physical
    • Color: Black
    • Unit Weight with Batteries: 2.4 oz. (68 g)
    • Shipping Weight: 3.2 oz. (91 g) with 1 lbs (454 g) minimum; unit weight: 1.6 oz. (45 g)
    • Dimensions (HxWxD): 3.75x2x0.64" (9.6x5x1.7cm); with belt clip: 3.75x2x0.8" (9.6x5x2.1cm)
  • Environmental
    • Temperature - Operation: 14 to 104 ºF (-10 to 40 ºC)
    • Temperature - Storage: (-)4 to 122 °F (-20 to 50 °C)
    • Relative Humidity: 0 to 95% relative humidity, non-condensing
  • ComplianceStandards: FCC Part 15, Part 90, Industry Canada, RoHS

Why Choose SoundPro?

Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.

  • Certified Account Managers

    Our Account Managers, with 16+ industry certifications, are ready to find your solution.

  • Personalized Pricing

    We know every project is unique. Get a personalized quote anytime you need it

  • Fast Shipping & Local Pickup

    In stock items ship same day if ordered by 4pm CST. Pickup offered in Irving, TX.

  • Accountability from Real People

    We aim for a smooth, transparent experience by setting and sticking to clear expectations.

  • Easy Payments & Financing

    We accept all major credit cards and also offer financing through our partners.

1 of 2