1 1

Martin Lighting Exterior Projection 500 Outdoor LED Gobo Projector | Wide | Aluminum

Martin Lighting Exterior Projection 500 Outdoor LED Gobo Projector | Wide | Aluminum

SoundPro Item: 96257 | Part Number: 90506525

$6,466.50
$7,185.00 $6,466.50
Your Price Sold out
MSRP: $7,185.00 | MAP: $6,466.50

Usually ships in 5-7 business days

  • Four Independent Effect Layers Enable Rich Dynamic Programming Without Extra Fixtures
  • IP66 And IK08 Ratings Protect Against Weather, Dust, And Physical Impact
  • C5-M Marine-Grade Corrosion Resistance Supports Coastal And Industrial Installs
  • Motorized Variable Focus Covers Close-Range To Infinity Projection Distances
  • DMX, RDM, And Standalone Modes Integrate Into Permanent Or Temporary Systems
  • Onboard OLED Control Panel Simplifies Addressing And Configuration On The Fixture
  • 20,000-Hour LED Lifetime Reduces Maintenance Burden On Installed Positions
Log in or register for YOUR best price

The Martin Lighting Exterior Projection 500 is built for architectural and entertainment lighting professionals who need dependable, high-output gobo projection in exposed outdoor environments. Whether the application is a branded building facade, a themed entertainment installation, or a touring production requiring precision framing, this fixture delivers clean, flat-field image projection with the mechanical resilience to stay in service across changing seasons and weather conditions. The 230 W white light LED engine drives substantial lumen output while the motorized focus system covers distances from close range to infinity, making it equally capable on tight courtyards and large-scale architectural targets.

Four independent layers of dynamic effects, including a color wheel, rotating gobo wheel with animation, prism wheel with interchangeable prisms, and motorized variable frost, give programmers a broad creative toolkit without requiring additional fixtures in the rig. DMX, RDM, and standalone operating modes with an onboard OLED panel keep integration straightforward for both temporary event deployments and permanent installed systems. The cast aluminum housing carries IP66 ingress protection, IK08 impact resistance, and C5-M marine-grade corrosion certification, covering installs in coastal, industrial, and high-humidity environments where lesser-rated fixtures fail prematurely.

Compared to conventional discharge-based outdoor projectors, the LED engine delivers significant energy savings, a rated lifetime of 20,000 hours, and eliminates lamp replacement cycles that drive up maintenance costs on installed or hard-to-access positions. The fixture is available in multiple beam angle variants and finish options to match specific throw distances and aesthetic requirements across a project.

View full details

Specifications

Certifications
Ingress Protection
IP66
Impact Resistance
IK08 (with control panel display cover plate installed)
Corrosion Resistance
C5-M (very high corrosivity / marine, ISO 12944)
Vibration Resistance
1.0g Sinusoidal (IEC 60068-2-6); 0.7g RMS Random (IEC 60068-2-64)
RoHS
Compliant
REACH
Compliant
WEEE
Compliant
Proposition 65
Compliant
Global CB Certification/IECEE
IEC 60598-2-5 (IEC 60598-1)
EU Safety
EN 60598-2-1, EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
EU EMC
EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61547
US Safety
ANSI/UL 1598
US EMC
CFR 47 Part 15 Class A
Canadian Safety
CSA C22.2 No 250.0
Australia/NZ
RCM
India
BIS
DMX Compliance
USITT DMX512-A
RDM Compliance
ANSI/ESTA E1.20
Dimensions
Length
415 mm (16.4 in.) - includes mounting yoke
Width
293 mm (11.6 in.) - includes mounting yoke
Height
444 mm (17.5 in.) - includes mounting yoke
Effective Projected Area
0.15 m2
Weight
Product Weight
17.5 kg (38.6 lbs.) - includes mounting yoke
Electrical
AC Power
100-240/277 V nominal, 50/60 Hz
Power Supply
Auto-ranging electronic switch-mode
Typical Power At 110 V, 60 Hz
320 W, 2.9 A, PF 0.977
Typical Power At 230 V, 50 Hz
310 W, 1.4 A, PF 0.971
Typical Power At 277 V, 60 Hz
305 W, 1.2 A, PF 0.950
Idle Power
32 W, 0.3 A
Typical Half-Cycle RMS Inrush Current
8.4 A
Surge Protection
4 KV
Optics
Light Source
230 W white light LED engine
LED Manufacturer
Prolight Opto
CRI
72
Color Temperature
8300 K
LED Lifetime
20,000 hours (to >70% luminous output)
Binning
Tight color and flux binning
Efficacy (Max Output)
20 lm/W
Lumen-to-Weight Ratio
349 lm/kg (158 lm/lb)
Photometric Data
Narrow Beam Cut-Off Angle
12 degrees; Total Output: 5000 lm; Center Peak: 203,000 cd
Medium Beam Cut-Off Angle
22 degrees; Total Output: 6100 lm; Center Peak: 77,000 cd
Wide Beam Cut-Off Angle
37 degrees; Total Output: 5700 lm; Center Peak: 28,000 cd
Very Wide Beam Cut-Off Angle
50 degrees; Total Output: 3400 lm; Center Peak: 11,000 cd
Dynamic Effects
Color Wheel
8 interchangeable colors + open
Gobo Wheel
6 rotating gobos plus open, indexing, variable rotation
Gobo Animation
Variable speed linear animation effect
Prism
Prism wheel with 2 interchangeable prisms, prism rotation and indexing
Frost
Motorized variable
Dimming
0-100% electronic
Shutter
Strobe and pulse effects, instant open and blackout
Focus
Motorized, variable 3 m (9.8 ft.) to infinity
Control
DMX Channels
13
Control Options
DMX, RDM, standalone
Standalone Scenes
Up to 20 scenes with global fade/hold times
8-Bit Control
Color/gobo selection, prism, frost, animation
16-Bit Control
Gobo indexing and rotation, focus and intensity
Configuration Interface
Onboard control panel with OLED display
Construction
Housing
Cast aluminum
Finish
Hard anodized, metallic grey lacquered
Front Glass
5 mm (0.2 in.) anti-reflection coated tempered glass
Gobos
Suitable Material
Borosilicate glass, coatings heat-resistant to 450 C (842 F)
Alternative Material
Aluminum 1060, paint on front lens side, 450 C (842 F)
Gobo Diameter
30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.)
Maximum Image Diameter
23 mm (0.91 in.)
Glass Gobo Thickness Minimum
1.1 mm +/-0.1 mm (0.045 +/-0.004 in.)
Glass Gobo Thickness Maximum
3.0 mm +/-0.3 mm (0.12 in. +/-0.012 in.)
Aluminum Gobo Thickness
0.5 mm +/-0.02 mm (0.020 in. +/-0.001 in.)
Gobo Paint Type
HT paint
Connectivity
Power Cable Entry
IP68 cable gland
Power Connection
1.8 m (5.9 ft.) cable tail with bare ends
Data Cable Entry
IP68 cable gland
Data Connection
1.8 m (5.9 ft.) combined input + output cable tail with bare ends
Installation
Mounting
Adjustable yoke
Location Rating
Suitable for wet locations; do not immerse in water
Orientation
Any (sides must be kept vertical)
Minimum Distance To Illuminated Surface
0.5 m (20 in.)
Thermal
Cooling
Convection, internal forced air
Total Heat Dissipation (Calculated)
1100 BTU/hr.
Maximum Surface Temperature
85 C (185 F)
Maximum Ambient Temperature
45 C (113 F)
Minimum Ambient Temperature
-30 C (-22 F)

Why Choose SoundPro?

Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.

Start Shopping

  • Certified Account Managers

    Our Account Managers, with 16+ industry certifications, are ready to find your solution.

  • Personalized Pricing

    We know every project is unique. Get a personalized quote anytime you need it

  • Fast Shipping & Local Pickup

    In stock items ship same day if ordered by 4pm CST. Pickup offered in Irving, TX.

  • Accountability from Real People

    We aim for a smooth, transparent experience by setting and sticking to clear expectations.

  • Easy Payments & Financing

    We accept all major credit cards and also offer financing through our partners.

1 2