1 1

Martin Lighting Exterior Projection 500 Outdoor LED Gobo Projector | Very Wide | EU | Aluminum

Martin Lighting Exterior Projection 500 Outdoor LED Gobo Projector | Very Wide | EU | Aluminum

SoundPro Item: 96254 | Part Number: 90506535

$5,890.50
$6,545.00 $5,890.50
Your Price Sold out
MSRP: $6,545.00 | MAP: $5,890.50

Usually ships in 5-7 business days

  • IP66-Rated Housing Withstands Continuous Outdoor And Wet Location Exposure
  • Four Layers Of Dynamic Effects For Complex Gobo, Color, And Animation Programming
  • Motorized Focus From Close Range To Infinity For Flexible Throw Distance Adjustment
  • High-Power LED Engine With Tight Binning Ensures Consistent Color Across Fixtures
  • Standalone Scene Storage Allows Operation Without An External Controller
  • C5-M Marine-Grade Corrosion Resistance Suits Coastal And High-Humidity Installations
  • RDM Support Enables Remote Addressing And Status Monitoring Over The Data Line
Log in or register for YOUR best price

The Martin Lighting Exterior Projection 500 is designed for architectural and outdoor entertainment lighting where precise gobo projection, logo imaging, and dynamic effects must survive continuous exposure to the elements. Lighting designers, integrators, and production teams working on building facades, landmark illumination, themed environments, and live event exteriors will find a tool built specifically for demanding outdoor deployments. The fixture supports both close-range and long-range throw applications, and beam angle variants allow the right optic to be selected for each site condition.

Four independent layers of dynamic effects, including a color wheel, rotating gobo wheel, gobo animation, and a dual-prism wheel with frost, give operators the creative flexibility needed for complex architectural programming without stacking separate fixtures. Control via DMX-512A, RDM, or standalone scene storage integrates cleanly into touring and installed lighting systems alike. The onboard OLED display simplifies addressing and configuration in the field without a laptop.

Where alternative outdoor projectors rely on discharge sources, the Exterior Projection 500 uses a high-power LED engine with tight color and flux binning, reducing maintenance cycles and total cost of ownership over long-term installed deployments. Cast aluminum housing with hard anodized and metallic grey lacquer finish, C5-M marine-grade corrosion resistance, and IP66 ingress protection make this fixture viable in coastal, rooftop, and high-humidity environments where lesser-rated units fail prematurely.

View full details

Specifications

Photometric Data
Beam Angle (Very Wide Cut-Off)
50 degrees
Total Output (Very Wide)
3400 lumens
Center Peak Intensity (Very Wide)
11,000 cd
CRI
72
Color Temperature
8300 K
LED Lifetime
20,000 hours (to >70% luminous output)
LED Manufacturer
Prolight Opto
Binning
Tight color and flux binning
Efficacy (Max Output)
20 lm/W
LWR
349 lm/kg (158 lm/lb)
Optics
Light Source
230 W white light LED engine
Dynamic Effects
Color Wheel
8 interchangeable colors + open
Gobo Wheel
6 rotating gobos plus open, indexing, variable rotation
Gobo Animation
Variable speed linear animation effect
Prism
Prism wheel with 2 interchangeable prisms, prism rotation and indexing
Frost
Motorized variable
Dimming
0-100% electronic
Shutter
Strobe and pulse effects, instant open and blackout
Focus
Motorized, variable 3 m (9.8 ft.) to infinity
Control and Programming
DMX Channels
13
Control Options
DMX, RDM, standalone
DMX Compliance
USITT DMX512-A
RDM Compliance
ANSI/ESTA E1.20
Stand-Alone Control
Up to 20 scenes with global fade/hold times
8-Bit Control
Color/gobo selection, prism, frost, animation
16-Bit Control
Gobo indexing and rotation, focus and intensity
Configuration and Addressing
Onboard control panel with OLED display
Dimensions
Length
415 mm (16.4 in.)
Width
293 mm (11.6 in.)
Height
444 mm (17.5 in.)
Note
All figures include mounting yoke
Weight
Product Weight
17.5 kg (38.6 lbs.)
Electrical
AC Power
100-240/277 V nominal, 50/60 Hz
Power Supply
Auto-ranging electronic switch-mode
Idle Power
32 W, 0.3 A
Surge Protection
4 KV
Typical Half-Cycle RMS Inrush Current
8.4 A
Power and Current at 110 V, 60 Hz
320 W, 2.9 A, PF 0.977
Power and Current at 230 V, 50 Hz
310 W, 1.4 A, PF 0.971
Power and Current at 277 V, 60 Hz
305 W, 1.2 A, PF 0.950
Thermal
Cooling
Convection, internal forced air
Total Heat Dissipation (Calculated)
1100 BTU/hr.
Maximum Surface Temperature
85 degrees C (185 degrees F)
Maximum Ambient Temperature
45 degrees C (113 degrees F)
Minimum Ambient Temperature
-30 degrees C (-22 degrees F)
Construction
Housing
Cast aluminum
Finish
Hard anodized, metallic grey lacquered
Front Glass
5 mm (0.2 in.) anti-reflection coated tempered glass
Ingress Protection
IP66
Impact Resistance
IK08 (with control panel display cover plate installed)
Corrosion Resistance
C5-M (very high corrosivity / marine, ISO 12944)
Vibration Resistance
1.0g Sinusoidal (IEC 60068-2-6), 0.7g RMS Random (IEC 60068-2-64)
EPA (Effective Projected Area)
0.15 m2
RoHS
Compliant
Gobos
Suitable Material
Borosilicate glass, coatings heat-resistant to 450 degrees C (842 degrees F)
Alternative Material
Aluminum 1060, paint on front lens side, 450 degrees C (842 degrees F)
Gobo Diameter
30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.)
Maximum Image Diameter
23 mm (0.91 in.)
Glass Gobo Thickness, Minimum
1.1 mm +/-0.1 mm (0.045 +/-0.004 in.)
Glass Gobo Thickness, Maximum
3.0 mm +/-0.3 mm (0.12 in. +/- 0.012 in.)
Aluminum Gobo Thickness
0.5 mm +/- 0.02 mm (0.020 in. +/- 0.001 in.)
Connections
Power Cable Entry
IP68 cable gland
Power Connection
1.8 m (5.9 ft.) cable tail with bare ends
Data Cable Entry
IP68 cable gland
Data Connection
1.8 m (5.9 ft.) combined input + output cable tail with bare ends
Installation
Mounting
Adjustable yoke
Location Rating
Suitable for wet locations. Do not immerse in water.
Orientation
Any (sides must be kept vertical)
Minimum Distance to Illuminated Surfaces
0.5 m (20 in.)
Certifications
Global CB Certification/IECEE
IEC 60598-2-5 (IEC 60598-1)
EU Safety
EN 60598-2-1, EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
EU EMC
EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61547
US Safety
ANSI/UL 1598
US EMC
CFR 47 Part 15 Class A
Canadian Safety
CSA C22.2 No 250.0
Australia/NZ
RCM
India
BIS
Environmental
REACH
Compliant
WEEE
Compliant
Proposition 65
Compliant
Identifiers
Model
90506535

Why Choose SoundPro?

Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.

Start Shopping

  • Certified Account Managers

    Our Account Managers, with 16+ industry certifications, are ready to find your solution.

  • Personalized Pricing

    We know every project is unique. Get a personalized quote anytime you need it

  • Fast Shipping & Local Pickup

    In stock items ship same day if ordered by 4pm CST. Pickup offered in Irving, TX.

  • Accountability from Real People

    We aim for a smooth, transparent experience by setting and sticking to clear expectations.

  • Easy Payments & Financing

    We accept all major credit cards and also offer financing through our partners.

1 2