1 1

Martin Lighting Exterior Projection 500 Outdoor LED Gobo Projector | Very Wide | White

Martin Lighting Exterior Projection 500 Outdoor LED Gobo Projector | Very Wide | White

SoundPro Item: 96253 | Part Number: 90506555

$7,321.50
$8,135.00 $7,321.50
Your Price Sold out
MSRP: $8,135.00 | MAP: $7,321.50

Usually ships in 5-7 business days

  • IP66-Rated Housing Provides Full Protection Against Dust And Powerful Water Jets
  • IK08 Impact Resistance Supports Exposed Outdoor Installation Without Enclosures
  • C5-M Marine-Grade Corrosion Resistance For Coastal And Industrial Environments
  • Four Independent Effect Layers Enable Complex Visuals From A Single Fixture
  • Motorized Focus Adjusts From Close-Range To Infinity For Flexible Throw Distances
  • DMX, RDM, And Standalone Modes Integrate Into Any Control Architecture
  • Low Maintenance LED Engine Reduces Total Cost Of Ownership Over Long Deployments
Log in or register for YOUR best price

The Martin Lighting Exterior Projection 500 is built for architectural and entertainment lighting designers who need reliable, high-output gobo projection in permanent outdoor installations. Whether the application is branding a building facade, animating a public plaza, or creating immersive environments for a live event venue, the fixture provides the photometric control and environmental resilience to perform night after night without constant maintenance.

The 230W white light LED engine paired with interchangeable beam angle optics lets integrators tailor the throw for anything from tight architectural framing to broad wash coverage. Four independent effect layers, covering color, gobo projection, gobo animation, and prism or frost, enable complex visuals from a single fixture footprint. DMX512-A and RDM compliance means the unit integrates cleanly into existing control infrastructure, and a standalone mode with up to 20 stored scenes removes the console dependency for simpler installs.

Cast aluminum construction with hard anodized and lacquered finish, IP66 ingress protection, IK08 impact resistance, and C5-M marine-grade corrosion resistance make this fixture appropriate for coastal and industrial environments where other products require frequent replacement or shelter. A convection and forced-air thermal system handles operation across a wide ambient temperature range, while auto-ranging power input and surge protection support deployment across global electrical standards.

View full details

Specifications

Optics
Light Source
230 W white light LED engine
LED Manufacturer
Prolight Opto
CRI (Color Rendering Index)
72
Color Temperature
8300 K
LED Lifetime
20,000 hours (to >70% luminous output)
Binning
Tight color and flux binning
Photometric Data
Narrow (Cut-off Angle / Output / Peak)
12 deg / 5000 lumens / 203,000 cd
Medium (Cut-off Angle / Output / Peak)
22 deg / 6100 lumens / 77,000 cd
Wide (Cut-off Angle / Output / Peak)
37 deg / 5700 lumens / 28,000 cd
Very Wide (Cut-off Angle / Output / Peak)
50 deg / 3400 lumens / 11,000 cd
Dynamic Effects
Color Wheel
8 interchangeable colors + open
Gobo Wheel
6 rotating gobos plus open, indexing, variable rotation
Gobo Animation
Variable speed linear animation effect
Prism
Prism wheel with 2 interchangeable prisms, prism rotation and indexing
Frost (Wash Effect)
Motorized variable
Dimming
0-100% electronic
Shutter
Strobe and pulse effects, instant open and blackout
Focus
Motorized, variable 3 m (9.8 ft.) to infinity
Control and Programming
Control Options
DMX, RDM, standalone
DMX Channels
13
DMX Compliance
USITT DMX512-A
RDM Compliance
ANSI/ESTA E1.20
Standalone Control
Up to 20 scenes with global fade/hold times
Configuration and Addressing
Onboard control panel with OLED display
8-Bit Control
Color/gobo selection, prism, frost, animation
16-Bit Control
Gobo indexing and rotation, focus and intensity
Electrical
AC Power
100-240/277 V nominal, 50/60 Hz
Power Supply
Auto-ranging electronic switch-mode
Surge Protection
4 KV
Idle Power
32 W, 0.3 A
Typical Power at 110 V 60 Hz
320 W, 2.9 A, PF 0.977
Typical Power at 230 V 50 Hz
310 W, 1.4 A, PF 0.971
Typical Power at 277 V 60 Hz
305 W, 1.2 A, PF 0.950
Typical Half-Cycle RMS Inrush Current
8.4 A
Thermal
Cooling
Convection, internal forced air
Total Heat Dissipation (Calculated)
1100 BTU/hr.
Maximum Surface Temperature
85 deg C (185 deg F)
Maximum Ambient Temperature
45 deg C (113 deg F)
Minimum Ambient Temperature
-30 deg C (-22 deg F)
Dimensions
Length
415 mm (16.4 in.)
Width
293 mm (11.6 in.)
Height
444 mm (17.5 in.)
Note
All figures include mounting yoke
Weight
Product Weight
17.5 kg (38.6 lbs.)
Construction
Housing
Cast aluminum
Finish
Hard anodized, metallic grey lacquered
Front Glass
5 mm (0.2 in.) anti-reflection coated tempered glass
Ingress Protection
IP66
Impact Resistance
IK08 (with control panel display cover plate installed)
Corrosion Resistance
C5-M (very high corrosivity / marine, ISO 12944)
Vibration Resistance
1.0g Sinusoidal (IEC 60068-2-6), 0.7g RMS Random (IEC 60068-2-64)
EPA (Effective Projected Area)
0.15 m2
Connectivity
Power Cable Entry
IP68 cable gland
Power Connection
1.8 m (5.9 ft.) cable tail with bare ends
Data Cable Entry
IP68 cable gland
Data Connection
1.8 m (5.9 ft.) combined input + output cable tail with bare ends
Installation
Mounting
Adjustable yoke
Location
Suitable for wet locations. Do not immerse in water.
Orientation
Any (sides must be kept vertical)
Minimum Distance to Illuminated Surface
0.5 m (20 in.)
Gobos
Suitable Material
Borosilicate glass, coatings heat-resistant to 450 deg C (842 deg F)
Alternative Material
Aluminum 1060, paint on front lens side, 450 deg C (842 deg F)
Gobo Diameter
30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.)
Maximum Image Diameter
23 mm (0.91 in.)
Glass Gobo Thickness Minimum
1.1 mm +/-0.1 mm (0.045 +/-0.004 in.)
Glass Gobo Thickness Maximum
3.0 mm +/-0.3 mm (0.12 in. +/-0.012 in.)
Aluminum Gobo Thickness
0.5 mm +/- 0.02 mm (0.020 in. +/- 0.001 in.)
Environmental
RoHS
Compliant
REACH
Compliant
WEEE
Compliant
Proposition 65
Compliant
Efficacy (Max Output)
20 lm/W
Lumen-to-Weight Ratio
349 lm/kg (158 lm/lb)
Certifications
Global CB Certification/IECEE
IEC 60598-2-5 (IEC 60598-1)
EU Safety
EN 60598-2-1, EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
EU EMC
EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61547
US Safety
ANSI/UL 1598
US EMC
CFR 47 Part 15 Class A
Canadian Safety
CSA C22.2 No 250.0
Australia/NZ
RCM
India
BIS
Identifiers
MPN
90506555

Why Choose SoundPro?

Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.

Start Shopping

  • Certified Account Managers

    Our Account Managers, with 16+ industry certifications, are ready to find your solution.

  • Personalized Pricing

    We know every project is unique. Get a personalized quote anytime you need it

  • Fast Shipping & Local Pickup

    In stock items ship same day if ordered by 4pm CST. Pickup offered in Irving, TX.

  • Accountability from Real People

    We aim for a smooth, transparent experience by setting and sticking to clear expectations.

  • Easy Payments & Financing

    We accept all major credit cards and also offer financing through our partners.

1 2