1 1

Martin Lighting Exterior Wash 310 Compact RGBW LED Wash Fixture | 10deg | EU

Martin Lighting Exterior Wash 310 Compact RGBW LED Wash Fixture | 10deg | EU

SoundPro Item: 95749 | Part Number: 90507075

$5,661.00
$6,290.00 $5,661.00
Your Price Sold out
MSRP: $6,290.00 | MAP: $5,661.00

Usually ships in 5-7 business days

  • IP66 Housing Provides Full Ingress Protection For Permanent Outdoor Installation
  • Cree RGBW Quad-Color Premixed LEDs Deliver Accurate, Consistent Color Mixing
  • Six Selectable Beam Angle Options Cover Narrow To Asymmetric Spread Applications
  • Full Gamut Color Calibration And Tight Binning Ensure Multi-Fixture Uniformity
  • Integrated OLED Control Panel Supports On-Site Addressing And Standalone Programming
  • DMX512-A And RDM Compliance For Professional Control System Integration
  • C5-M Corrosion Resistance Rating Suited For Marine And High-Corrosivity Environments
Log in or register for YOUR best price

The Martin Lighting Exterior Wash 310 is built for lighting designers and architectural lighting integrators who need a high-output, permanently installed outdoor fixture capable of illuminating building facades, bridges, and large structures with precision color. Powered by 30 Cree RGBW quad-color premixed LEDs, the unit delivers consistent, calibrated color across large surfaces without the color fringing common in non-premixed sources. Full Gamut Color Calibration and tight flux binning ensure uniformity across multiple fixtures on a single structure.

For installed and permanent outdoor applications, the cast aluminum housing with anodized and electrostatic powder-coated finish carries an IP66 ingress protection rating and IK08 impact resistance, making it suitable for exposed environments including marine-grade C5-M corrosion conditions. The adjustable yoke supports mounting in any orientation, giving installers flexibility on complex architectural surfaces. An integrated OLED control panel simplifies addressing and standalone programming of up to 20 scenes on site without additional hardware.

Where the Exterior Wash 310 stands apart from comparable architectural fixtures is in its combination of output efficiency, beam flexibility, and protocol depth. DMX512-A and RDM compliance, RS-485 data connectivity, and firmware update via DMX link make it compatible with professional control infrastructure. Available beam angle configurations spanning from a narrow 11 degrees to a 66 x 15 degree asymmetric spread allow a single fixture model to serve a wide range of throw distances and surface geometries, reducing the number of SKUs required on a complex project.

View full details

Specifications

Certifications
Ingress Protection
IP66
Impact Resistance
IK08 (with control panel display cover plate installed)
Corrosion Resistance
C5-M (very high corrosivity / marine, ISO 12944)
Vibration Resistance
1.0g Sinusoidal (IEC 60068-2-6), 0.7g RMS Random (IEC 60068-2-64)
RoHS
Compliant
REACH
Compliant
WEEE
Compliant
Proposition 65
Compliant
Global CB Certification/IECEE
IEC 60598-2-5 (IEC 60598-1)
EU Safety
EN60598-2-5 (EN60598-1), EN62471, EN62493, EN60598-2-1
EU EMC
EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5
US Safety
ANSI/UL 1598
US EMC
47 CFR Part 15 Class A
Canadian Safety
CSA C.22.2 No. 250
Australia/NZ
RCM
India
BIS
Dimensions
Length
283 mm (11.2")
Width
404 mm (15.9")
Height
439 mm (17.3")
Weight
Product Weight
19.0 kg (42.0 lbs.)
Electrical
AC Power
100 - 240 / 277 V nominal, 50/60 Hz
Power Supply Unit
Integrated, auto-sensing multi-voltage
Power Consumption (Idle)
7 W (steady state, all LEDs at zero intensity)
Maximum Total Power Consumption
300 W
Surge Protection
4 KV
Max Earth Leakage
0.25 mA
Typical Inrush Current (Half-Cycle RMS)
10.9 A
Typical Power/Current At 100 V 60 Hz
2.7 A, 270 W, PF 0.99
Typical Power/Current At 120 V 60 Hz
2.3 A, 265 W, PF 0.99
Typical Power/Current At 230 V 50 Hz
1.2 A, 260 W, PF 0.98
Typical Power/Current At 277 V 60 Hz
1.0 A, 260 W, PF 0.95
Optics
Light Source
30 x RGBW quad-color LEDs
LED Manufacturer
Cree
Minimum LED Lifetime
50,000 hours (to >70% luminous output)
Beam Angle Options
No diffuser: 11 degrees, Narrow diffuser: 13 degrees, Medium diffuser: 27 degrees, Wide diffuser: 43 degrees, Very wide diffuser: 62 degrees, Asymmetric diffuser: 66 x 15 degrees
Binning
Tight color and flux binning
Calibration
Full Gamut Color Calibration
Photometric Data
Total Luminous Output
8300 lumens
CRI
> 70
CCT
6500 K (White LED)
Efficacy (Max Output)
32 lm/W
Lumen-to-Weight Ratio
437 lm/kg (198 lm/lb)
Performance
Color Mixing
RGBW
Intensity Control
0 - 100%
Control and Programming
Control Systems
DMX, RDM
DMX Channels
3-5 depending on DMX mode
DMX Compliance
USITT DMX512-A
Receiver
RS-485
Standalone Control
Up to 20 scenes with global fade/hold times
Addressing and Programming Interface
Control panel with OLED display
Firmware Update
Serial upload via DMX link
Connectivity
Power Connection
1.8 m (5.9 ft.) cable tail without connector
Power Input Cable Type (EU)
H05RN-F 300/500V, 3 x 0.75 mm2, 7 mm diameter
Data Connection
1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail
Cable Entries
IP68 cable gland
Construction
Housing Material
Cast aluminum
Color
Light grey (white, black, or other colors available on request)
Surface Treatment
Anodized and electrostatic powder-coated
Effective Projected Area (EPA)
0.14 m2 including snoot
Thermal
Cooling
Convection
Maximum Ambient Temperature
45 degrees C (113 degrees F)
Minimum Ambient Temperature
-30 degrees C (-22 degrees F)
Maximum Surface Temperature At 40 degrees C Ambient
70 degrees C (158 degrees F)
Total Heat Dissipation
945 BTU/hr
Installation
Mounting
Adjustable yoke
Orientation
Any
Minimum Distance To Illuminated Surface
0.2 m (0.6 ft.)
Included Items
Included
Cover plate for control panel
Identifiers
Ordering Part Number (EU, Aluminum)
90507075
Ordering Part Number (US, Aluminum)
90507085

Why Choose SoundPro?

Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.

Start Shopping

  • Certified Account Managers

    Our Account Managers, with 16+ industry certifications, are ready to find your solution.

  • Personalized Pricing

    We know every project is unique. Get a personalized quote anytime you need it

  • Fast Shipping & Local Pickup

    In stock items ship same day if ordered by 4pm CST. Pickup offered in Irving, TX.

  • Accountability from Real People

    We aim for a smooth, transparent experience by setting and sticking to clear expectations.

  • Easy Payments & Financing

    We accept all major credit cards and also offer financing through our partners.

1 2