Skip to product information
1 of 1

Martin Lighting VDO Sceptron NoBlend Diffuser IP65 Clip-On Optic | 10mm | Smoked | 1000mm

Martin Lighting VDO Sceptron NoBlend Diffuser IP65 Clip-On Optic | 10mm | Smoked | 1000mm

SoundPro Item: 96347 | Part Number: 91610129

Regular price $240.30
Regular price $267.00 Sale price $240.30
Your Price Sold out
MSRP: $267.00 | MAP: $240.30

Usually ships in 5-7 business days

  • Field-Exchangeable Clip-On Design Enables Fast Optical Swaps Without Tools
  • Available In 10mm, 20mm, And 40mm Pixel Pitch Versions To Match Fixture Configuration
  • Offered In Clear And Smoked Finishes For Transmission Or Contrast Control
  • Compatible With Both 320mm And 1000mm VDO Sceptron Bar Lengths
  • IP65-Rated Fixture Compatibility Supports Outdoor And Semi-Exposed Deployments
  • Interchangeable With All VDO Sceptron Optical Accessories Across The Full Range
  • Delivers Homogenous Pixel Blending For Seamless Continuous Surface Arrays

The Martin Lighting VDO Sceptron NoBlend Diffuser range is engineered for lighting designers and production riggers who need precise optical control over pixel-mapped LED bars in touring, live event, broadcast, and permanent installation environments. By clipping directly onto the extruded aluminum profile of VDO Sceptron fixtures without tools, these diffusers solve the persistent challenge of visible pixel separation in continuous surface arrays, delivering a smooth, uniform light output across adjacent fixtures without the hot-spotting common to open-front configurations.

The family spans three pixel pitch options covering 10mm, 20mm, and 40mm pitch VDO Sceptron fixtures, with each pitch available in clear and smoked finishes and in two bar lengths to match the fixture format in use. This matrix of choices lets designers select the optical treatment that best suits viewing distance, ambient light conditions, and creative intent, whether that means maximum transmission with a clear lens or controlled contrast reduction with a smoked version. All diffusers and lenses in the VDO Sceptron optical accessory line are interchangeable and clip onto fixtures using the same interface, making on-site changes practical during load-in or between shows.

The underlying VDO Sceptron fixtures these diffusers serve carry an IP65 protection rating, supporting deployment in outdoor festival rigs and semi-exposed architectural installs alongside indoor productions. Combined with full-gamut pixel-level calibration on the fixture side and compatibility with Martin P3 and DMX control ecosystems, these diffusers represent the final optical stage in a rigorously engineered pixel system where color, brightness, and uniformity are matched across every bar in a rig.

View full details

Specifications

Identifiers
MPN
91610129
Dimensions
Length
1000 mm (39.4 in.)
Width
27 mm (1.06 in.)
Height Without Front
28 mm (1.10 in.)
Height With Standard Front (Square Diffuser)
42 mm (1.65 in.)
Weight
Weight Without Front
1.2 kg (2.6 lbs.)
Weight With Standard Front (Square Diffuser)
1.4 kg (3.1 lbs.)
Optics
Pixel Pitch
10mm
Finish
Smoked
Diffuser/Lens Mounting
Clip-on, field-exchangeable
Minimum LED Lifetime
50,000 hours (to >70% luminous output)
Binning
Tight color and flux binning
Calibration
Full Gamut Pixel Calibration
Viewing Angle
120° x 120° (half-peak)
Photometric Data
Luminous Intensity, Calibrated Mode
250 cd per meter
Luminous Output, Calibrated Mode
750 lumen per meter
Total Output, Calibrated Mode
8333 nits (fixtures placed in continuous surface at 30 mm center-to-center)
LED Array
1 x 100
CCT
6500 Kelvin
LED Refresh Rate, Standard Mode
1001 Hz
LED Refresh Rate, High Refresh Mode
4004 Hz
Color Resolution
16 bits per color (48 bits per pixel)
Electrical
Nominal Input Voltage
48 VDC +/- 4%
Maximum Power Consumption
30 W
Power Supply Options
Martin P3 PowerPort 1500, Martin P3 PowerPort 1000 IP, Martin DMX PowerPort 375, Martin IP66 PSU 240W or generic 48 VDC PSU
Connectivity
Power and Data Input
6-pin custom (BBD) IP66-rated
Power and Data Thru
6-pin custom (BBD) IP66-rated
Hot Plugging
Compatible
Signal Protocol
Martin P3 (via Martin P3 PowerPort) or DMX
Control and Programming
Control Resolution
16-bit (P3) or 8-bit (DMX) per color
Control Options
Martin P3 System Controller or DMX
Protocol Detection
Automatic
DMX Compliance
USITT DMX512-A
RDM Compliance
ANSI/ESTA E1.20
Control Modes, Direct DMX
RGB, Basic, Segment and Pixel
DMX Channels, Direct DMX
3/10/13/22/103/307
Control Modes, DMX via P3
P3 Intensity, P3 RGB, P3 Basic, P3 Hybrid and P3 PixelMap
DMX Channels, DMX via P3
Wide range of options from 1 to 303
Firmware Update
Via Martin P3 System Controller
Construction
Color
Matte black
Base
Extruded aluminum profile
Protection Rating
IP65
RoHS
Compliant
Thermal
Cooling
Convection
Maximum Ambient Temperature
55° C (131° F)
Minimum Ambient Temperature
-30° C (-22° F)
Total Heat Dissipation (Calculated, +/- 10%)
115 BTU/hr
Environmental
RoHS
Compliant
REACH
Compliant
WEEE
Compliant
Proposition 65
Compliant
Efficacy (Max Output)
22.1 lm/W
LWR
553 lm/kg (255 lm/lb)
Certifications
EU Safety
EN 60950-1, EN 60950-22, EN 62471
EU EMC
EN 55032, EN 55024
US Safety
UL 60950-1, UL 60950-22
US EMC
FCC Part 15 Class A
Canadian Safety
CSA C22.2 No. 60950-1, No. 60950-22
Canadian EMC
ICES-003 Class A
Australia/NZ
RCM
India
BIS
Installation
Mounting
Channel for M6 captive nuts on back of profile
Mounting Options
M6 bolts, optional sliding bracket (accepts M12 bolt), half coupler, spigot adapter, linear coupler, parallel coupler, pivot coupler, floorstand
Orientation
Any

Why Choose SoundPro?

Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.

  • Certified Account Managers

    Our Account Managers, with 16+ industry certifications, are ready to find your solution.

  • Personalized Pricing

    We know every project is unique. Get a personalized quote anytime you need it

  • Fast Shipping & Local Pickup

    In stock items ship same day if ordered by 4pm CST. Pickup offered in Irving, TX.

  • Accountability from Real People

    We aim for a smooth, transparent experience by setting and sticking to clear expectations.

  • Easy Payments & Financing

    We accept all major credit cards and also offer financing through our partners.

1 of 2