1 1

Martin Lighting VDO Sceptron Lens Array Narrow IP65 Clip-On Optical Accessory | 40mm | 1000mm

Martin Lighting VDO Sceptron Lens Array Narrow IP65 Clip-On Optical Accessory | 40mm | 1000mm

SoundPro Item: 96503 | Part Number: 91610143

$131.67
$146.30 $131.67
Your Price Sold out
MSRP: $146.30 | MAP: $131.67

Usually ships in 5-7 business days

  • Clip-On Field-Exchangeable Design Enables Fast Optical Changes Without Tools
  • Narrow Beam Shaping Concentrates Pixel Output For Spill-Critical Applications
  • Available In 20mm And 40mm Pixel Pitch Versions To Match Fixture Configuration
  • IP65 Protection Supports Outdoor Festival And Exposed Architectural Installations
  • Full Gamut Pixel Calibration Maintains Homogenous Look Across Tiled Fixture Runs
  • Compatible With P3 And DMX Control Including Hybrid Real-Time Protocol Toggling
  • Interchangeable With Full Range Of VDO Sceptron Optical Accessories
Log in or register for YOUR best price

The Martin Lighting VDO Sceptron Lens Array Narrow is a field-exchangeable optical accessory designed for lighting directors, programmers, and integrators who need precise beam shaping from VDO Sceptron LED linear fixtures in touring, festival, broadcast, or permanent installation contexts. The narrow lens array clips directly onto the fixture profile with no tools required, making it practical for fast changeovers during load-in or maintenance on rigged positions. Available in pixel pitches of 20mm and 40mm, and in two fixture lengths, it accommodates a range of pixel density and run-length requirements within the same VDO Sceptron ecosystem.

Unlike generic diffusers that spread output broadly, the Lens Array Narrow concentrates light along a tighter axis, making it the right choice when fixtures are used as pixel-mapped set pieces, blinder arrays, or architectural accents where spill control matters. The accessory is fully color and brightness calibrated to maintain the fixture's pixel-level consistency across surfaces, preserving the homogenous look that the VDO Sceptron platform delivers when fixtures are tiled in continuous runs. Cross-compatibility with the VDO Fatron and VDO Dotron cabling system means optical changes do not require rewiring or reprogramming.

For production teams managing rental inventory or permanent rigs, the interchangeable optical system across the entire VDO Sceptron accessory range reduces spare-parts overhead. The IP65-rated host fixtures and IP66-rated BBD connections support outdoor festival rigs and exposed architectural installs without additional weatherproofing. P3 and DMX control compatibility, including hybrid real-time toggling between protocols, keeps the lens array useful regardless of the control infrastructure on any given show or site.

View full details

Specifications

Certifications
IP Rating
IP65
RoHS
Compliant
REACH
Compliant
WEEE
Compliant
Proposition 65
Compliant
EU Safety
EN 60950-1, EN 60950-22, EN 62471
EU EMC
EN 55032, EN 55024
US Safety
UL 60950-1, UL 60950-22
US EMC
FCC Part 15 Class A
Canadian Safety
CSA C22.2 No. 60950-1, No. 60950-22
Canadian EMC
ICES-003 Class A
Australia/NZ
RCM
India
BIS
Dimensions
Length
1000 mm (39.4")
Width
27 mm (1.06")
Height Without Front
28 mm (1.10")
Height With Standard Front (Square Diffuser)
42 mm (1.65")
Weight
Weight Without Front
1.2 kg (2.6 lbs)
Weight With Standard Front (Square Diffuser)
1.4 kg (3.1 lbs)
Electrical
Nominal Input Voltage
48 VDC +/- 4%
Maximum Power Consumption (All LEDs Full Intensity)
7.5 W
Power Supply Options
Martin P3 PowerPort 1500, Martin P3 PowerPort 1000 IP, Martin DMX PowerPort 375, Martin IP66 PSU 240W or generic 48 VDC PSU
Optics
Pixel Pitch
40.00 mm
Luminous Intensity, Calibrated Mode
62 cd per meter
Luminous Output, Calibrated Mode
187 lumen per meter
Total Output, Calibrated Mode
2083 nits (fixtures placed in continuous surface at 30 mm center-to-center)
Viewing Angle
120 x 120 degrees (half-peak)
LED Array
1 x 25
CCT
6500 Kelvin
LED Refresh Rate, Standard Mode
1001 Hz
LED Refresh Rate, High Refresh Mode
4004 Hz
Color Resolution
16 bits per color (48 bits per pixel)
Minimum LED Lifetime
50,000 hours (to >70% luminous output)
Binning
Tight color and flux binning
Calibration
Full Gamut Pixel Calibration
Diffuser/Lens Options
Flat Diffuser, Flat Smoked Diffuser, Round Diffuser, Round Smoked Diffuser, Square Diffuser, Square Smoked Diffuser, Tube Diffuser, Tube Smoked Diffuser, NoBlend Diffuser 40mm, NoBlend Smoked Diffuser 40mm, Lens Array Narrow 40mm, Asymmetric (Wall-Washing) Lens
Controls
Control Resolution
16-bit (P3) or 8-bit (DMX) per color
Control Options
Martin P3 System Controller (via Martin P3 PowerPort) or DMX
Protocol Detection
Automatic
Setting and Addressing
Martin P3 System Controller or RDM-compliant controller
DMX Compliance
USITT DMX512-A
RDM Compliance
ANSI/ESTA E1.20
Firmware Update
Via Martin P3 System Controller
Control Modes, Direct DMX
RGB, Basic, Segment and Pixel
DMX Channels, Direct DMX
3/10/13/22/31/82
Control Modes, DMX via P3
P3 Intensity, P3 RGB, P3 Basic, P3 Hybrid and P3 PixelMap
DMX Channels, DMX via P3
Wide range of options from 1 to 78
Device Status
Multi-color visual indication
Device Test and Reset
Magnetic pushbutton to call up local test patterns and reset device
Connectivity
Power and Data Input
6-pin custom (BBD) IP66-rated
Power and Data Thru
6-pin custom (BBD) IP66-rated
Hot Plugging
Compatible
Signal Protocol
Martin P3 (via Martin P3 PowerPort) or DMX
Construction
Color
Matte black
Base
Extruded aluminum profile
Mounting
Channel for M6 captive nuts on back of profile
Mounting Options
M6 bolts, optional sliding bracket (accepts M12 bolt), half coupler, spigot adapter, linear coupler, parallel coupler, pivot coupler, floorstand
Orientation
Any
Environmental
Cooling
Convection
Maximum Ambient Temperature
55 degrees C (131 degrees F)
Minimum Ambient Temperature
-30 degrees C (-22 degrees F)
Total Heat Dissipation (Calculated, +/- 10%)
30 BTU/hr
Efficacy (Max Output)
22.1 lm/W
Lumen-to-Weight Ratio
138 lm/kg (64 lm/lb)

Why Choose SoundPro?

Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.

Start Shopping

  • Certified Account Managers

    Our Account Managers, with 16+ industry certifications, are ready to find your solution.

  • Personalized Pricing

    We know every project is unique. Get a personalized quote anytime you need it

  • Fast Shipping & Local Pickup

    In stock items ship same day if ordered by 4pm CST. Pickup offered in Irving, TX.

  • Accountability from Real People

    We aim for a smooth, transparent experience by setting and sticking to clear expectations.

  • Easy Payments & Financing

    We accept all major credit cards and also offer financing through our partners.

1 2