
Specifications
Acoustic Performance
Free field frequency response ±6 dB
41 Hz ... 21.4 kHz
Free field frequency response ±3 dB
44 Hz ... 21 kHz
Pass band free field frequency response
48 Hz … 20.5 kHz, ±1.25 dB
Free field frequency linearity deviation between 100 Hz and 10 kHz
±0.7 dB
Reproduction accuracy between 100 Hz and 10 kHz: 100%, 80%, 50% of loudspeakers produced
±0.45; ±0.30; ±0.17 dB
Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu)
<20 dB(A) SPL
Sine wave output with a THD < 0.5 % at 1 m in half space
95 dB SPL (>97 Hz)
Max. SPL calc. in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz)
116.8 dB SPL
Max. SPL in full space at 3% THD at 1m (averaged between 100 Hz and 6 kHz)
110.8 dB SPL
Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz)
105.1 dB SPL
Max. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions
108 dB(C) SPL
Max. short term SPL with music material at 2.3 m in typical listening conditions (pair / full range)
98 dB(C) SPL
Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer)
104 dB(C) SPL
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range)
88 / 93 dB(C) SPL
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair with subwoofer)
87 / 93 dB(C) SPL
Dolby DARDT. Max SPL fullrange
113 dB SPL
Dolby DARDT. Max SPL bass managed
119 dB SPL
Recommended Listening Distance
1.0 … 2.0 m; (3'… 6')
Feasible Listening Distance
0.75 … 4.0 m; (2'6"… 12')
Acoustical Principle
Bassreflex, Ports at the front
Inputs And Audio
Analog input(s)
XLR: analog electronically balanced
Analog input impedance
24k Ohms
Max. input level
+24 dBu for 94 dB SPL setting; +14 dBu for 100 dB SPL setting; +9 dBu for 108 dB SPL setting; -1 dBu for 114 dB SPL setting
Common mode rejection ratio (CMRR)
>56 dB @ 15kHz
Volume control
via MA 1 software
Volume control range; resolution
0 … -∞ dB; 0.1 dB
Analog dynamic range; THD+N (A-D-A)
118 dB, A-weighted, 90 dB
Digital input(s)
RCA (75 Ω): S/PDIF
Digital output(s)
RCA (75 Ω): S/PDIF
Max. Digital Input Level; pk-pk, unbalanced / balanced
1.2 V
Digital converter: resolution; design
24 Bit
Digital converter: sampling rate
32 kHz..200 kHz
Digital internal sampling rate
48 kHz
Output sampling rate
identical to input sample rate
Dynamic range A-D
121 dB(A)
Dynamic range A-D-A (Converter)
118 dB(A)
Dynamic range D-A
121 dB(A)
Digital sensitivity
-18 dBFS = 100 dB SPL at 1 m
Latency ADA / DA
Analog Input,: 2.6 ms; SPDIF Input: 2.1 ms
Delay: User adjustable delay range
0 … 120 ms
Delay: Resolution: time; distance
20.8 µs
Delay: Max. frames Audio-video synchronisation (lip sync)
0 … 120 ms for TOF=0ms, depends on APP implmentation
Delay: Time-of-flight maximum distance
0 … 120 ms for lipsync=0ms, depends on APP implmentation
Input gain control (sensitivity)
0 dB ... -15 dB
Output level control (output level in 1 m based on 0 dBu input level)
94; 100; 108; 114 dB SPL
Input Select
Analog; S/PDIF L; S/PDIF R; Mono
Ground Lift
Yes
Control
Local; Network
DSP And Processing
Controller design
Digital; active
DSP resolution
32 Bit Audio, Processing 64 Bit double precision
Crossover frequency
1700 Hz
Crossover slope
48 dB / octave
Equalization: Bass
0; -2; -4; -6 dB
Equalization: Low-Mid
0; -2; -4; -6 dB
Equalization: Treble
+1; 0; -1; -2 dB
Equalization: via Neumann.Control software
No
Automatic room calibration via MA 1
Yes
FIR phase correction
Linear phase (120 Hz ... 16 kHz; +/- 45°)
Protection circuitry
Independent soft clip, peak and thermo limiters for woofer and tweeter; Woofer excursion limiter; thermo limiter for the electronics and amplifiers
Infrasonic filter: frequency; slope
40 Hz; 12 dB / octave
Remote control
MA 1 software via an RJ45 connector carrying standard IP data
Amplification And Power
Mains Switch
Yes
Mains Voltage Select
Universal Power Supply 100 V~ … 240 V~
Output power woofer amplifier (THD+N with limiter deactivated: 10%)
145 W
Output power tweeter amplifier (THD+N with limiter deactivated: 10%)
100 W
Output power woofer amplifier (THD+N with limiter deactivated: 0.1%)
120 W
Output power tweeter amplifier (THD+N with limiter deactivated: 0.1%)
80 W
Mains Power Supply: input voltage; frequency
100-240 V; 50/60 Hz
Power consumption (230 V / 100 V): Standby
0.3 W
Power consumption (230 V / 100 V): Idle
15 W
Power consumption (230 V / 100 V): Full output
320 W
Standby
automatic, 90 mins (default); user defined in software
Drivers And Enclosure
Woofer
130 mm; (5.25") with protecting black metal grille
Tweeter
25 mm; (1") with protecting black metal grille
Cabinet material
Composite polycarbonate front and rear, wooden sleeve
Cabinet surface finish; color (front / back)
Painted; metallic anthracite (RAL 7021) / Black (RAL 9005)
Mounting points
2 x M6 threaded inserts with 70 mm spacing on back panel; thread depth 15 mm; (5/8”)
Internal net volume
6.0 l
External net volume
11.3 l
Dimensions And Environmental
Product dimensions (height x width x depth)
287 x 182 x 227 mm; (11.3 " x 7.16 " x 8.94")
Product weight
5.4 kg; (11 lbs 14 oz)
Packed weight
6,6 kg; (14 lbs 8 oz)
Packed dimensions (height x width x depth), mm (inches)
422 x 271 x 381 mm; (16.6 x 10.7 x 15 ")
Packed cube
0.043 m³; (1.52 ft³)
Operating conditions
+10° C to +40° C; (+50° F to +104° F); <75% RH, non-condensing
Transport/storage conditions
-25° C to +60° C; (-13° F to 140° F); <90% RH; non-condensing
Acoustical Axis horizontal
91 mm; (3.6 ")
Acoustical Axis vertical (from bottom)
166 mm; (6.5 ")
Why Choose SoundPro?
Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.