Skip to product information
1 of 1

Nexo DTDAMP4x0.7 four Channel Amplifier

Nexo DTDAMP4x0.7 four Channel Amplifier

SoundPro Item: 15449 | Part Number: DTDAMP4X0.7

Regular price $1,439.99
Regular price $1,797.00 Sale price $1,439.99
Your Price Sold out
MSRP: $1,797.00 | MAP: $1,439.99

Usually ships in 5-7 business days

  • Two models of high-power, lightweight four channel amplifiers
  • Perfect match for the NEXO speakers supported by the DTD Controller
  • High-efficiency Switch Mode power supply and Amplifier channel design
  • Channels can be independently bridged two by two
  • Four Inputs on XLR connectors and four Outputs on SP-4 connectors
  • Extensive protection (Mains over/ undervoltage, temperature, DC outputs, current and voltage peak limiters, variable speed cooling system)

The DTDAMP range is composed of two models of four channel amplifiers housed in a 1U rack and weighting only 7.5 Kg. The DTD Controller offers a very efficient solution for processing most of the Nexo Speakers, from the ID series to our world famous PS15. When used with a DTDAMP you are sure to get all the necessary power for your NEXO speakers, while this combo offers both a coherent look and ease of use. A pair of DTD + DTDAMP will weigh together less than 10 Kg, while being able to process and power system composed, for example, of 2 x NEXO Speakers + 2 x NEXO subs. This performance is due to the use of high-density and highly integrated components together with high-efficiency design (smaller heatsinks) for power supply/power amplifier parts. The DTDAMP offers all the sensor and protection that are mandatory for a professional touring amplifier, such as mains over/under voltage, Over-voltage or DC output on each channel, short circuit etc. The variable speed cooling system will assure a quiet and cool amplifier while the front to back cooling system ensure compatibility inside racks where both DTDAMP and our high-end NXAMP are used together in large installations. Once your NEXO Speakers are selected in your DTD Controller, you can use your DTD +DTDAMP system in most situations without any further adjustments to the settings. When used with the NEXO DTD controller the DTDAMP is the perfect solution for “Dry” hire or where the user has a limited knowledge but still allowing the best possible result from the Nexo speaker system.

View full details

Specifications

Number of channels
4 x amplifiers channel, 2 by 2 bridgeable
Max. output voltage (no Load)
4 x 85 Volts
Max. output power (4 x 8 Ohms)
4 x 360 Watts
Max. output power (4 x 4 Ohms)
4 x 700 Watts
Max. output power (2 bridge x 8 Ohms)
2 x 1400 watts
Frequency response
+/- 0.5 dB from 20 Hz to 20 kHz
Input impedance
10 kOhms
Input sensitivity
+5 dBU
Nominal Gain
32 dB
Dynamic Range (A-weighted)
> 110 dB
THD+N
Typical 0.01%
Analog audio inputs
4 x balanced analog inputs on XLR
Power outputs
4 x SP4 outputs
Link switch
To use same XLR input for 2 x adjacent channels
Mains sockets
IEC C14 Inlet with secure lock
Switch and knobs
Mains On/Off switch and volume control knob per channel
View meters
x LEDs (signal / -18 dB / -6 dB / Peak) per channel
Amplifier status
Amp Ready and Temperature indicator per channels pairs
Mains voltage
Factory set for 120 volts of 230 volts mains operation
Power consumption (Idle)
65 Watts
Power consumption 1/8 max. / 4 Ohms
580 Watts
Power consumption 1/4 max. / 4 Ohms
1100 Watts
Dimensions (W x H x D)
480 (W) x 44 (H) x 370 (D) mm, 19 inches / 1U
Weight
7.5 kg
Operating temperature range
0°C - 45 °C
CE conformity
2006/95/CE (Low voltage) 2004/108/CE (EMC) 2002/95/CE (RoHS)
Electrical safety certification
CSA, CB, EN60065
EMC certification
EN55103-1 / EN55103-2 / FCC

Why Choose SoundPro?

Since 1973, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.

  • Certified Account Managers

    Our Account Managers, with 16+ industry certifications, are ready to find your solution.

  • Personalized Pricing

    We know every project is unique. Get a personalized quote anytime you need it

  • Fast Shipping & Local Pickup

    In stock items ship same day if ordered by 4pm CST. Pickup offered in Irving, TX.

  • Accountability from Real People

    We aim for a smooth, transparent experience by setting and sticking to clear expectations.

  • Easy Payments & Financing

    We accept all major credit cards and also offer financing through our partners.

1 of 2