Skip to product information
1 of 2

Q-SYS DCA1824 4-Channel Cinema Power Amplifier Low Ohm

Q-SYS DCA1824 4-Channel Cinema Power Amplifier Low Ohm

SoundPro Item: 119385 | Part Number: DCA1824

Pricing available upon request

Pricing available upon request

Your Price Sold out

Usually ships in 5-7 business days

  • DataPort Connectivity Enables Direct Integration With DCM And DCP Cinema Processors
  • Per-Channel DIP Switch Control For Clip Limiter, LF Filter, And Bridge Mode
  • Bridged Mono Mode Delivers Up To 900W Into 4Ω For Subwoofer Applications
  • Active Inrush Limiting Protects Building Circuits During Power-On Sequencing
  • Recessed Gain Knobs With Security Cover Prevent Unauthorized Level Changes
  • Full Short Circuit, Thermal, Ultrasonic, And RF Protection For Load Safety
  • Variable-Speed Rear-To-Front Fan Cooling Manages Thermal Load In Enclosed Racks

The Q-SYS DCA1824 targets cinema integrators who need high channel density, flexible load handling, and native integration with QSC digital cinema infrastructure. Its four channels can each drive parallel speaker arrays down to 2 ohms, making it a practical single-rack-unit solution for surround configurations in medium to large auditoriums that would otherwise require additional amplification stages. Bridged mono mode extends that capability to 900W into 4 ohms, covering LFE and subwoofer channels from the same chassis without a separate dedicated amplifier.

What separates the DCA1824 from generic commercial power amplifiers is its onboard HD15 DataPort, which connects directly to QSC DCM Digital Cinema Monitor and DCP Digital Cinema Processor units. This native integration path eliminates additional interface hardware, reduces wiring runs, and simplifies monitoring across multi-screen installations. Rear-panel DIP switches give integrators per-channel control over clip limiting, LF filtering, input configuration, and bridge mode, all without interrupting signal chains during setup or service calls.

Designed for the realities of unattended cinema equipment rooms, the DCA1824 includes active inrush limiting to protect building circuits during power-on sequencing, along with comprehensive fault protection covering short circuit, open circuit, thermal, ultrasonic, and RF conditions. Recessed front-panel gain knobs behind a security cover prevent inadvertent level changes after commissioning. At 2RU and 14 inches deep, it fits constrained console-mounted racks without requiring a larger bay, and variable-speed rear-to-front fan cooling manages thermal load in enclosed rack environments.

Downloads

View full details

Specifications

Audio
Channels
4
Output Per Channel (8Ω, 20 Hz-20 kHz, 0.05% THD)
170 W continuous avg.
Output Per Channel (4Ω, 20 Hz-20 kHz, 0.1% THD)
250 W
Output Per Channel (2Ω, EIA 1 kHz, 1% THD)
450 W
Bridged Mono (16Ω, 20 Hz-20 kHz, 0.1% THD)
340 W
Bridged Mono (8Ω, 20 Hz-20 kHz, 0.1% THD)
500 W
Bridged Mono (4Ω, 1 kHz, 1% THD)
900 W
Signal To Noise Ratio (20 Hz-20 kHz, unweighted)
-105 dB
Frequency Response (LF filter off)
20 Hz-20 kHz, ±0.2 dB; 8 Hz-50 kHz, +0/-3 dB
Distortion (THD, typical)
Less than 0.02% @ 8 and 4 ohms
Distortion (SMPTE-IM)
< 0.01%
Damping Factor (1 kHz and below)
Greater than 500
Input Sensitivity (8Ω, full rated power)
0.93 V rms
Input Sensitivity (4Ω, full rated power)
0.8 V rms
Input Impedance
10 kΩ unbalanced, 20 kΩ balanced
Input Clipping
10 V rms (+22 dBu)
Voltage Gain (8Ω)
40x (32 dB)
Output Circuitry Class
AB+B
Connectivity
Input Connectors
3-pin detachable terminal blocks (per channel)
Output Connectors
Safety-shrouded barrier strip with monitor output (per channel)
DataPort
One HD15 per pair of channels
Controls
Front Panel
AC switch; Ch. 1-4 recessed gain knobs
Rear Panel DIP Switches
Clip limiter on/off per channel; LF filter on/off per channel; LF filter freq select 30 or 50 Hz per channel; inputs parallel or stereo; bridge mode
Dimensions
Height
3.5"
Width
19"
Depth
14"
Height (mm)
89 mm
Width (mm)
483 mm
Depth (mm)
356 mm
Rack Spaces
2U
Weight
Net Weight
21 lbs (9.5 kg)
Identifiers
Optional Accessories
SF-3 Subwoofer Filter, LF-3 Low Frequency Filter

Why Choose SoundPro?

Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.

  • Certified Account Managers

    Our Account Managers, with 16+ industry certifications, are ready to find your solution.

  • Personalized Pricing

    We know every project is unique. Get a personalized quote anytime you need it

  • Fast Shipping & Local Pickup

    In stock items ship same day if ordered by 4pm CST. Pickup offered in Irving, TX.

  • Accountability from Real People

    We aim for a smooth, transparent experience by setting and sticking to clear expectations.

  • Easy Payments & Financing

    We accept all major credit cards and also offer financing through our partners.

1 of 2