
Specifications
Dimensions
Depth
24
Audio
Self Noise (-15 Db Gain Setting) Cardioid
19.2 dB SPL-AToroid 26.8 dB SPL-A
Dynamic Range (-15 Db Gain Setting) Cardioid
96 dBToroid: 90 dB SPL
Digital Audio Sampling Rate
48 kHzBit
Audio Sampling Rate
48 kHzBit
Connectivity
Digital Output Channel Count
5 total channels ( 4 independent transmit channels, 1 Automatic mixing transmit channel)Sampling
General Input
(2) 3-pin block connector (Active
Connector) Pin Assignments Tip
Audio Input (Left)Ring 1: Audio Input (Right)Ring 2:
Included Items
MXA310 Table Array Microphone
2x
IntelliMix® P300-IMX Audio Conferencing Processor
1x
MXN5W-C + Tile Bridge
2x
Shipping
Weight
1710g (3.8 lbs)
General
MXA310
Polar Pattern All channels independently adjustable, Cardioid, Hypercardioid, Supercardioid, Toroid, Omnidirectional, Bidirectional, Connector TypeRJ45, Power RequirementsPower over Ethernet (PoE), Class 0 Power Consumption4W, maximum, Weight362 g (0.8 lbs), Dimensions (HxWxD) 3.6x13.4x13.4cm (1.4x5.3x5.3”), Control applicationHTML5 Browser-based, Operating Temperature Range−6.7°C (20°F) to 40°C (104°F), Storage Temperature Range−29°C (-20°F) to 74°C (165°F), Audio Frequency Response100 to 20,000 Hz, AES67 or Dante Digital Output Channel Count: 5 total channels ( 4 independent transmit channels, 1 Automatic mixing transmit channel), Sampling Rate: 48 kHz, Bit Depth: 24, Sensitivity (at 1 kHz, -15 dB Gain Setting) -21 dBFS/Pa, Maximum SPL (1 kHz at 1% THD, -15 dB Gain Setting) 115.2 dB SPL, Signal-To-Noise Ratio (Ref. 94 dB SPL at 1 kHz, -15 dB Gain Setting), Cardioid: 75 dB, Toroid: 67 dB, Latency (Not including Dante latency): <1 ms, Self Noise (-15 dB Gain Setting) Cardioid: 19.2 dB SPL-A, Toroid 26.8 dB SPL-A, Dynamic Range (-15 dB Gain Setting) Cardioid: 96 dB, Toroid: 90 dB SPL, Built-in Digital Signal Processing Per Channel: Equalizer (4-band Parametric), Mute, Gain (140 dB range), System: Automatic mixing, Low-Cut Filter (-12 dB/octave @ 150 Hz), Networking Cable Requirements: Cat 5e or higher (shielded cable recommended)
P300
General Input: (2) 3-pin block connector (Active Balanced), Output: (2) 3-pin block connector (Impedance Balanced), Mobile: (1) TRRS 3.5 mm (1/8″), USB Connections ((1) USB 2.0, Type B): Single port carries 2 input and 2 output channels (Summed mono), Network Connections (Dante Digital Audio); ((1) RJ45): 10 Dante Inputs, 8 Dante Outputs, Polarity: Non-inverting, any input to any output, Power Requirements: 802.3 at Type 2 (PoE Plus), Class 4, Power Consumption: 17.5W, maximum, Weight: 1710g (3.8 lbs), Dimensions (HxWxD): 4x21x22.6cm (1.6x8.3x8.9”), Control Software: Shure Designer, Operating Temperature Range: −6.7°C (20°F) to 50°C (122°F), Storage Temperature Range: −29°C (20°F) to 74°C (165°F), Thermal Power Dissipation Maximum 17.5 W (60 BTU/hr), typical 14.6 W ( 50 BTU/hr), Audio Frequency Response (+1, 1.5 dB): 20 to 20,000 Hz, Dante Digital Audio Sampling Rate: 48 kHz, Bit Depth: 24, USB Audio Sampling Rate: 48 kHz, Bit Depth: 16, 24, Latency (Does not include Dante latency) Firmware 4.1 and newer Dante 1-8 in to Dante out (AEC enabled) 15.4 ms, Dante 1-8 in to Dante out (AEC disabled) 8.7 ms, Dante 9-10 in to Dante out 3.4 ms, Analog in to Analog out 3.8 ms, Firmware 3.1 and older Dante 1-8 in to Dante out (AEC enabled) 12.5 ms, Dante 1-8 in to Dante out (AEC disabled) 5.8 ms, Dante 9-10 in to Dante out 1.8 ms, Analog in to Analog out 2.2 ms, Acoustic Echo Cancellation Tail Length: Up to 300 ms, Analog Connections (Block Connectors) Dynamic Range (20 Hz to 20 kHz, A-weighted, typical) Analog-to-Dante: 113 dB, Dante-to-Analog: 117 dB, Equivalent Input Noise (20 Hz to 20 kHz, Aweighted, input terminated with 150Ω) Line 86 dBV, Aux 98 dBV, Total Harmonic Distortion (@ 1 kHz, 0 dBV Input, 0 dB analog gain): <0.05%, Common Mode Rejection Ratio (150Ω balanced source @ 1 kHz): >50 dB, Input Impedance: 9.6 kΩ, Input Clipping Level Line: +27 dBV, Aux: +15 dBV, Output Impedance: 80 Ω, Output Clipping Level Line: +20 dBV, Aux: +0 dBV, Mic: 26 dBV, Mobile Connection (3.5 mm Connector) Pin Assignments Tip: Audio Input (Left), Ring 1: Audio Input (Right), Ring 2: Ground, Sleeve: Audio Output (To Phone), Dynamic Range (20 Hz to 20 kHz, A-weighted, typical) Analog-to-Dante: 99 dB, Dante-to-Analog: 90 dB, Equivalent Input Noise (20 Hz to 20 kHz, Aweighted, input terminated with 20Ω): 95 dBV, Total Harmonic Distortion (@ 1 kHz, 0 dBV Input, 0 dB analog gain): <0.05%, Input Impedance: 3.7 kΩ, Input Clipping Level: +4 dBV, Output Impedance: 1.4 kΩ, Output Clipping Level (Output terminated with 2.2 kΩ): 20 dBV, Networking Cable Requirements: Cat 5e or higher (shielded cable recommended), Mobile Pin Assignments (TRRS) Tip: Audio Input (Left), Ring 1: Audio Input (Right ), Ring 2: Ground, Sleeve: Audio Output (To Phone), Note: The audio input (tip and ring 1) are summed to a mono signal in the P300, to send the signal to any destination on a single channel.
MXN5W-C
Connector Type: RJ45, Power Requirements: Power over Ethernet (PoE Class 0) or PoE Plus (Class 4), Weight: 6.5 lbs (2.95 kg), Product Dimensions (HxWxD): 12x12x4" (304.8x304.8x101.6mm), Control Software: Shure Designer, Plenum Rating: UL 2043 (Suitable for Air Handling Spaces), Operating Temperature Range: −6.7°C (20°F) to 40°C (104°F), Storage Temperature Range: −29°C (20°F) to 74°C (165°F), Frequency Response (-3 dB): 120 Hz to 20 kHz, Digital Signal Processing: Delay, Limiter, Signal Generator, Equalizer (4-band Parametric), Latency: 1.5 ms (Not including Dante latency), POWER CONSUMPTION Power over Ethernet (PoE): 12W maximum (11W typical), PoE Plus: 24W maximum (23W typical), MAXIMUM OUTPUT LEVEL COVERAGE ANGLE Power over Ethernet (PoE) @ 1 meter: 92 dB SPL -6 dB at 2 kHz 180 degrees, PoE Plus @ 1 meter: 98 dB SPL -6 dB at 10 kHz 107 degrees
Rate
48 kHzBit
Toroid
67 dB
Signal Processing per Channel
Equalizer (4-band Parametric), Mute
Clipping Level Line
+27 dBVAux: +15 dBVOutput
Mobile Pin Assignments (TRRS) Tip
Audio Input (Left)Ring 1: Audio Input (Right )Ring 2: GroundSleeve: Audio Output (To Phone)Note: The audio input (tip and ring 1) are summed to a mono signal in the P300, to send the signal to any destination on a single channel.
Plus
24W maximum (23W typical)
Audio Performance
Latency
1.5 ms (Not including Dante latency)
Why Choose SoundPro?
Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.