Dimensions
Adjustable Lobe Width Narrow
30 degreesMedium: 40 degreesWide: 70 degrees
Depth
24USB
Audio
Digital Audio Sampling Rate
48 kHzBit
Audio Sampling Rate
48 kHzBit
Connectivity
AES67 Or Dante Digital Output Channel Count
6 total channels (4 independent transmit channels, 1 Automix output, 1 AEC reference in channel)
Dante latency) Direct Outputs
8.7 msAutomix output (Includes
General Input
(2) 3-pin block connector (Active
Connector) Pin Assignments Tip
Audio Input (Left)Ring 1: Audio Input (Right)Ring 2:
Construction
Color
Matte Black
Included Items
MXA710-2FT
1x
P300-IMX
1x
MXN5W-C + Tile Bridge
4x
HUDDLY IQ
1x
HUDDLY-DMB
1x
USB3-CA-90-2M
1x
Shipping
Weight
2 lbs (0.91 kg)
General
710
Adjustable Lobe Width Narrow: 30 degrees, Medium: 40 degrees, Wide: 70 degrees, Connector Type: RJ45, Power Requirements: Power over Ethernet (PoE), Class 0, Power Consumption: 10W maximum, Weight: 2 lbs (0.91 kg), Product Dimensions (HxWxL): 0.87x2.36x25.04" (22.09x60x636mm), Control Software: Shure Designer, Plenum Rating: UL2043 (Suitable for Air Handling Spaces), Dust Protection: IEC 60529 IP5X Dust Protected, Operating Temperature Range: −6.7°C (20°F) to 40°C (104°F), Storage Temperature Range: −29°C (-20°F) to 74°C (165°F), Audio Frequency Response: 100 Hz to 20 kHz, AES67 or Dante Digital Output Channel Count: 6 total channels (4 independent transmit channels, 1 Automix output, 1 AEC reference in channel), Sampling Rate: 48 kHz, Bit Depth: 24, Sensitivity (at 1 kHz): -7.4 dBFS/Pa, Maximum SPL (Relative to 0 dBFS overload): 101.4 dB SPL, Signal-To-Noise Ratio (Ref. 94 dB SPL at 1 kHz): 71.2 dB A-weighted, Latency (Does not include Dante latency) Direct Outputs: 8.7 ms, Automix output (Includes IntelliMix processing): 19.3 ms, Self Noise: 22.9 dB SPL-A, Dynamic Range: 78.5 dB, Built-in Digital Signal Processing: Automatic mixing, Acoustic Echo Cancellation (AEC), Noise Reduction, Automatic Gain Control, Compressor, Delay, Equalizer (4-band Parametric), Mute, Gain (140 dB range), Acoustic Echo Cancellation Tail Length: Up to 250 ms, Networking Cable Requirements: Cat 5e or higher (shielded cable recommended)
Huddly IQ
Image 12 Megapixels 1/2.3” CMOS sensor, 1080p Full HD @ 30 fps, 720p HD @ 30 fps, 16:9 aspect ratio output, UVC 1.1 plug-and-play compatible, Hardware 5-element beamforming microphone array (optional), Aluminum unibody construction, High-performance video processing engine, Neural compute engine, Embedded mounting hinge, Camera tripod mount, Optics Ultra-wide angle glass optics, Horizontal field of view 120, Vertical field of view 90, Diagonal field of view 150, f/2.8 aperture, Connectivity USB Type-C connector, SuperSpeed USB 3, Power requirement 5V 900mA, Color: Matte Black, Packaging Dimensions (LxWxH): 80x52x50mm
MXN5W-C + Tile Bridge
Connector Type: RJ45, Power Requirements: Power over Ethernet (PoE Class 0) or PoE Plus (Class 4), Weight: 6.5 lbs (2.95 kg), Product Dimensions (HxWxD): 12x12x4" (304.8x304.8x101.6mm), Control Software: Shure Designer, Plenum Rating: UL 2043 (Suitable for Air Handling Spaces), Operating Temperature Range: −6.7°C (20°F) to 40°C (104°F), Storage Temperature Range: −29°C (20°F) to 74°C (165°F), Frequency Response (-3 dB): 120 Hz to 20 kHz, Digital Signal Processing: Delay, Limiter, Signal Generator, Equalizer (4-band Parametric), Latency: 1.5 ms (Not including Dante latency), POWER CONSUMPTION Power over Ethernet (PoE): 12W maximum (11W typical), PoE Plus: 24W maximum (23W typical), MAXIMUM OUTPUT LEVEL COVERAGE ANGLE Power over Ethernet (PoE) @ 1 meter: 92 dB SPL -6 dB at 2 kHz 180 degrees, PoE Plus @ 1 meter: 98 dB SPL -6 dB at 10 kHz 107 degrees
P300
General Input: (2) 3-pin block connector (Active Balanced), Output: (2) 3-pin block connector (Impedance Balanced), Mobile: (1) TRRS 3.5 mm (1/8″), USB Connections ((1) USB 2.0, Type B): Single port carries 2 input and 2 output channels (Summed mono), Network Connections (Dante Digital Audio); ((1) RJ45): 10 Dante Inputs, 8 Dante Outputs, Polarity: Non-inverting, any input to any output, Power Requirements: 802.3 at Type 2 (PoE Plus), Class 4, Power Consumption: 17.5W, maximum, Weight: 1710 g (3.8 lbs), Dimensions (HxWxD): 4x21x22.6cm (1.6x8.3x8.9”), Control Software: Shure Designer, Operating Temperature Range: −6.7°C (20°F) to 50°C (122°F), Storage Temperature Range: −29°C (20°F) to 74°C (165°F), Thermal Power Dissipation Maximum 17.5 W (60 BTU/hr), typical 14.6 W ( 50 BTU/hr), Audio Frequency Response (+1, 1.5 dB): 20 to 20,000 Hz, Dante Digital Audio Sampling Rate: 48 kHz, Bit Depth: 24, USB Audio Sampling Rate: 48 kHz, Bit Depth: 16, 24, Latency (Does not include Dante latency) Firmware 4.1 and newer Dante 1-8 in to Dante out (AEC enabled) 15.4 ms, Dante 1-8 in to Dante out (AEC disabled) 8.7 ms, Dante 9-10 in to Dante out 3.4 ms, Analog in to Analog out 3.8 ms, Firmware 3.1 and older Dante 1-8 in to Dante out (AEC enabled) 12.5 ms, Dante 1-8 in to Dante out (AEC disabled) 5.8 ms, Dante 9-10 in to Dante out 1.8 ms, Analog in to Analog out 2.2 ms, Acoustic Echo Cancellation Tail Length: Up to 300 ms, Analog Connections (Block Connectors) Dynamic Range (20 Hz to 20 kHz, A-weighted, typical) Analog-to-Dante: 113 dB, Dante-to-Analog: 117 dB, Equivalent Input Noise (20 Hz to 20 kHz, Aweighted, input terminated with 150Ω) Line 86 dBV, Aux 98 dBV, Total Harmonic Distortion (@ 1 kHz, 0 dBV Input, 0 dB analog gain): <0.05%, Common Mode Rejection Ratio (150Ω balanced source @ 1 kHz): >50 dB, Input Impedance: 9.6 kΩ, Input Clipping Level Line: +27 dBV, Aux: +15 dBV, Output Impedance: 80 Ω, Output Clipping Level Line: +20 dBV, Aux: +0 dBV, Mic: 26 dBV, Mobile Connection (3.5 mm Connector) Pin Assignments Tip: Audio Input (Left), Ring 1: Audio Input (Right), Ring 2: Ground, Sleeve: Audio Output (To Phone), Dynamic Range (20 Hz to 20 kHz, A-weighted, typical) Analog-to-Dante: 99 dB, Dante-to-Analog: 90 dB, Equivalent Input Noise (20 Hz to 20 kHz, Aweighted, input terminated with 20Ω): 95 dBV, Total Harmonic Distortion (@ 1 kHz, 0 dBV Input, 0 dB analog gain): <0.05%, Input Impedance: 3.7 kΩ, Input Clipping Level: +4 dBV, Output Impedance: 1.4 kΩ, Output Clipping Level (Output terminated with 2.2 kΩ): 20 dBV, Networking Cable Requirements: Cat 5e or higher (shielded cable recommended), Mobile Pin Assignments (TRRS) Tip: Audio Input (Left), Ring 1: Audio Input (Right ), Ring 2: Ground, Sleeve: Audio Output (To Phone), Note: The audio input (tip and ring 1) are summed to a mono signal in the P300, to send the signal to any destination on a single channel.
Plus
24W maximum (23W typical)
Clipping Level Line
+27 dBVAux: +15 dBVOutput
Mobile Pin Assignments (TRRS) Tip
Audio Input (Left)Ring 1: Audio Input (Right )Ring 2: GroundSleeve: Audio Output (To Phone)Note: The audio input (tip and ring 1) are summed to a mono signal in the P300, to send the signal to any destination on a single channel.
Audio Performance
Latency
1.5 ms (Not including Dante latency)
