
Specifications
Construction
Housing
Molded ABS
Cable
1.1 m (45 in.)
Included Items
BLX4R Rack Mount Receiver
1x
BLX1 Bodypack Transmitter
1x
SM35 Headset Microphone
1x
Rack Mount Bracket
1x
Long Rack Mount Bracket
1x
Link Bracket
1x
Hardware Kit
1x
Thread Adapter
1x
1/4 Wave antenna/BNC
2x
BNC Bulkhead Adapters
2x
Zippered Vinyl Bag
1x
22" BNC Cables
2x
Power Supply
1x
Shipping
Weight
2.6 oz. (75 g), without batteries
General
System
Working Range: 91 m (300 ft) Line of Sight, Audio Frequency Response: 50 to 15,000 Hz, Total Harmonic Distortion Ref. ±33 kHz deviation with 1 kHz tone : 0.5%, typical, Dynamic Range: 100 dB, A-weighted, typical, Operating Temperature: -18°C (0°F) to 57°C (135°F), Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output.
BLX1 Transmitter
Audio Input Level, max: -16 dBVmaximum, min (0 dB): +10 dBVmaximum, Gain Adjustment Range: 26 dB, Input Impedance: 1 MΩ, RF Transmitter Output: 10 mW, typical, Dimensions: 4.33 in. X 2.52 in. X 0.83 in. (110 mm X 64 mm X 21 mm) H x W x D, Weight: 2.6 oz. (75 g), without batteries, Housing: Molded ABS, Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline, Battery Life: up to 14 hours (alkaline)
BLX4R Receiver
Output Impedance, XLR connector: 200 Ω, 6.35 mm (1/4") connector: 50 Ω, Audio Output Level Ref. ±33 kHz deviation with 1 kHz tone , XLR connector: –20.5 dBV (into 100 kΩ load), 6.35 mm (1/4") connector: –13 dBV (into 100 kΩ load), RF Sensitivity: -105 dBm for 12 dB SINAD, typical, Image Rejection: >50 dB, typical, Dimensions: 1.65 in. X 7.80 in.X 6.42 in. (42 mm X 198 mm X 163 mm) H x W x D, Weight without antennas: 2.2 lbs (998 g), Housing: Molded ABS, steel, Power Requirements: 12–15 V DC @ 260 mA, supplied by external power supply (tip positive)
SM35 Performance Headset Condenser Microphone
Type: Electret Condenser, Frequency Response: 40 Hz to 20,000 Hz, Polar Pattern: Unidirectional (Cardioid), Output Impedance @ 1 kHz: 2400Ω, Audio Output Level: -59.0 dBV/Pa, Signal-To-Noise Ratio[1] @ 1 kHz: 55 dB, Maximum SPL[1] (1000Ω load, @ 1% THD): 153.0 dB, Dynamic Range[1] @ 1 kHz, 1000Ω load: 114.0 dB, Equivalent Output Noise[1] (Typical, A-Weighted): 39 dB, Power Requirements: +5 V DC (nominal), 10 V maximum (DC bias), Polarity: Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1, Cable: 1.1 m (45 in.), Connector: TA4F, Net Weight: 72 g (2.53 oz.)
Type
Electret Condenser
Why Choose SoundPro?
Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.