Electrical
Impedance XLR Output
100Ω6.35 mm (1/4“) output: 100Ω (50Ω, Unbalanced)
Audio
Audio Frequency Response
20 Hz – 20 kHz Note: Dependent on microphone type
RF Sensitivity
-88 dBm, typical
Connectivity
Compatibility
With Frequency Manager: Up to 11 compatible systems in typical setting, and up to 16 under ideal conditions, Without Frequency Manager: Up to 4 compatible systems in typical setting, and up to 8 under ideal conditions
RF Output Power
10 mW E.I.R.P. max
GLXD4+ DUAL BAND WIRELESS RECEIVER
Dimensions (HxWxD): 7.2x4.8x1.6" (182.8x121.97x40.3 mm), antennas folded, Weight : 10.9 oz (310g), Housing : Molded Plastic, Power Requirements : 14.5V - 17V, 600mA, Spurious Rejection: >35 dB, typical, Gain Adjustment Range: -20 to 40 dB in 1 dB steps, Phantom Power Protection: Yes, Configuration XLR Output: Impedance Balanced, 6.35 mm (1/4“) output: Impedance Balanced, Impedance XLR Output: 100Ω, 6.35 mm (1/4“) output: 100Ω (50Ω, Unbalanced), Maximum Audio Output Level XLR connector (into 600 Ω load): 1dBV, 6.35 mm (1/4“) connector (into 3 kΩ load): +8.5 dBV, Pin Assignments XLR Output: 1=ground, 2=hot, 3=cold, 6.35 mm (1/4“) connector: Tip=audio, Ring/Sleeve=ground, RECEIVER ANTENNA INPUT Impedance 50Ω, Antenna Type Dual Band 1/2 Wave Sleeve Dipole, non-removable, Maximum Input Level −20 dBm
TRANSMITTER INPUT Connector
4-Pin male mini connector (TA4M)Configuration: UnbalancedMaximum Input Level (1 kHz at 1% THD): +8.4 dBV (7.5 Vp-p)Antenna Type: Dual Band Internal MonopolePin Assignments TA4M 1: Ground (cable shield)2: + 5 V Bias3: Audio4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
Configuration XLR Output
Impedance Balanced6.35 mm (1/4“) output: Impedance Balanced
Pin Assignments XLR Output
1=ground, 2=hot, 3=cold6.35 mm (1/4“) connector: Tip=audio, Ring/Sleeve=ground
Construction
Housing
Molded Plastic
Included Items
GLXD1+ Bodypack Transmitter
1x
GLXD4+ Digital Wireless Receiver
1x
BETA98 Instrument Microphone
1x
PS43 Power Supply
1x
SB904 Lithium-Ion Rechargeable Battery
1x
Black Carrying Case
1x
Environmental
Operating Temperature Range
-18°C (0°F) to 57°C (135°F) Note: Battery characteristics may limit this range.
Storage Temperature Range
-29°C (-20°F) to 74°C (165°F)
Shipping
Weight
5.4 oz (153.1g), without battery
General
System Operating Range
Indoors: Up to 30 m (100 ft.) typical, with a maximum of 60 m (200 ft.) under ideal conditions, Outdoors: Up to 20 m (65 ft.) typical, with a maximum of 50 m (165 ft.) under ideal conditions
Transmit Mode
Shure Proprietary Digital - Dual Band (2.4 GHz and 5.8 GHz)
Dynamic Range
120 dB, A-weighted
Total Harmonic
Distortion 0.07%, typical
Polarity
Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 6,35 mm output.
GLXD1+ DUAL BAND BODYPACK TRANSMITTER
Dimensions (HxWxD) : 4.5x2.6x1.1” (115x66.94x28.51mm), without antenna, Weight: 5.4 oz (153.1g), without battery, Power Requirements: 3.7V Rechargeable Li-Ion, Housing Cast: Metal, Black Powdercoat, Input Impedance: 900 kΩ RF, Output Power: 10 mW E.I.R.P. max, TRANSMITTER INPUT Connector: 4-Pin male mini connector (TA4M), Configuration: Unbalanced, Maximum Input Level (1 kHz at 1% THD): +8.4 dBV (7.5 Vp-p), Antenna Type: Dual Band Internal Monopole, Pin Assignments TA4M 1: Ground (cable shield), 2: + 5 V Bias, 3: Audio, 4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
Beta 98 Microphone
Cartridge Type: Electret Condenser, Frequency Response: 20 to 20,000 Hz, Polar Pattern: Cardioid, Output Impedance: 150Ω, Sensitivity (at 1 kHz, open circuit voltage): –56 dBV/Pa (1.6 mV) (1 Pascal=94 dB SPL), Maximum SPL (1 kHz at 1% THD, 1KΩ load): 155 dB SPL, Equivalent Output Noise (A-weighted): 31 dB SPL (typical), Dynamic Range (at 1 kHz, 1KΩ load) 124 dB, 132 dB, Clipping Level (1 kHz at 0.25% THD, 1KΩ load): 3 dBV (1.4V), Signal-to-Noise Ratio (Referenced at 94 DB SPL at 1 kHz): 63 dB, Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3, Power Requirements: 11–52 VDC phantom power (IEC-61938), 1.2 mA
Indoors
Up to 30 m (100 ft.) typical, with a maximum of 60 m (200 ft.) under ideal conditions
Power
Battery Life
Up to 12 hours
