Electrical
Impedance Balancedimpedance XLR Output
100Ω6.35 mm (1/4") output: 100Ω (50Ω
Audio
Audio Frequency Response
20 Hz – 20 kHz Note: Dependent on microphone type
RF Sensitivity
-88 dBm, typical
Connectivity
Compatibility
With Frequency Manager: Up to 11 compatible systems in typical setting, and up to 16 under ideal conditions, Without Frequency Manager: Up to 4 compatible systems in typical setting, and up to 8 under ideal conditions
RF Output Power
10 mW E.I.R.P. max
TRANSMITTER INPUT Connector
4-Pin male mini connector (TA4M)Configuration: UnbalancedMaximum Input Level (1 kHz at 1% THD): +8.4 dBV (7.5 Vp-p)Antenna Type: Dual Band Internal MonopolePin Assignments TA4M 1: Ground (cable shield)2: + 5 V Bias3: Audio4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
OUTPUT Configuration XLR Output
Balanced6.35 mm (1/4") output:
Unbalanced)Full-Scale Output XLR
LINE setting= +18 dBV, MIC setting= −12 dBV (1/4")6.35mm: 1=ground, 2=hot, 3=coldPin
Assignments XLR Output
1=ground, 2=hot, 3=cold6.35 mm (1/4") connector: Tip=audio, Ring=no audio, Sleeve=groundMic/Line
Construction
Housing
Steel
Included Items
GLXD1+ Bodypack Transmitter
1x
GLXD4R+ Digital Wireless Receiver
1x
PS43 Power Supply
1x
SB904 Lithium-Ion Rechargeable Battery
1x
WA302 Instrument Cable (TA4F to 1/4")
1x
Zippered Vinyl Bag
1x
Rack-mount Hardware
1x
Environmental
Operating Temperature Range
-18°C (0°F) to 57°C (135°F) Note: Battery characteristics may limit this range.
Storage Temperature Range
-29°C (-20°F) to 74°C (165°F)
Shipping
Weight
5.4 oz (153.1g), without battery
General
System Operating Range
Indoors: Up to 30 m (100 ft.) typical, with a maximum of 60 m (200 ft.) under ideal conditions, Outdoors: Up to 20 m (65 ft.) typical, with a maximum of 50 m (165 ft.) under ideal conditions
Transmit Mode
Shure Proprietary Digital - Dual Band (2.4 GHz and 5.8 GHz)
Dynamic Range
120 dB, A-weighted
Total Harmonic
Distortion 0.07%, typical
Polarity
Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 6,35 mm output.
GLXD1+ DUAL BAND BODYPACK TRANSMITTER
Dimensions (HxWxD) : 4.5x2.6x1.1” (115x66.94x28.51mm), without antenna, Weight: 5.4 oz (153.1g), without battery, Power Requirements: 3.7V Rechargeable Li-Ion, Housing Cast: Metal, Black Powdercoat, Input Impedance: 900 kΩ RF, Output Power: 10 mW E.I.R.P. max, TRANSMITTER INPUT Connector: 4-Pin male mini connector (TA4M), Configuration: Unbalanced, Maximum Input Level (1 kHz at 1% THD): +8.4 dBV (7.5 Vp-p), Antenna Type: Dual Band Internal Monopole, Pin Assignments TA4M 1: Ground (cable shield), 2: + 5 V Bias, 3: Audio, 4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
GLXD4R+ DUAL BAND RACK RECEIVER
Dimensions: 7.7x6.4x1.6" (196.8x162.97x41.8mm), without antenna, Weight : 30.5 oz (866g) without batteries, Housing: Steel, Power Requirements: 14.5V - 17V, 600mA, Spurious Rejection: >35 dB, typical, Gain Adjustment Range: −18 to 42 dB in 1 dB steps, Phantom Power Protection: Yes, AUDIO OUTPUT Configuration XLR Output: Balanced, 6.35 mm (1/4") output: Impedance balanced, Impedance XLR Output: 100Ω, 6.35 mm (1/4") output: 100Ω (50Ω, Unbalanced), Full-Scale Output XLR: LINE setting= +18 dBV, MIC setting= −12 dBV (1/4"), 6.35mm: 1=ground, 2=hot, 3=cold, Pin Assignments XLR Output: 1=ground, 2=hot, 3=cold, 6.35 mm (1/4") connector: Tip=audio, Ring=no audio, Sleeve=ground, Mic/Line Switch: 30 dB Pad, RECEIVER ANTENNA INPUT Impedance 50Ω, Antenna Type Dual Band 1/2 WaveSleeve Dipole, Maximum Input Level −20 dBm
Indoors
Up to 30 m (100 ft.) typical, with a maximum of 60 m (200 ft.) under ideal conditions
Switch
30 dB Pad
Power
Battery Life
Up to 12 hours
