
Specifications
'General Information
Manufacturer
Tripp Lite
Manufacturer Part Number
SMART500RT1U
Brand Name
Tripp Lite
Product Line
SmartPro
Product Name
SmartPro 500VA Rack/Tower UPS
Product Type
Line-interactive UPS
Technical Information
Plug/Connector Type
NEMA 5-15P
Receptacles
7 x NEMA 5-15R
Switching Time
4 ms
Power Description
Load Capacity
500 VA/300 W
Input Voltage
110 V AC
Input Voltage Range
120 V AC Single-phase
Output Voltage
120 V AC Single-phase
Frequency
60 Hz
Waveform Type
Pulse-width Modulated Sine Wave
Surge Energy Rating
480 J
Filtering
EMI / RFI
Management
Network Management
SNMP Manageable Optional
Overload Protection
Via 15A input breaker
Alarm
On Battery
Overload
UPS Fault
Low Battery
Emergency Power OFF
Yes
Controls/Indicators
Status Indicators
5 front panel LEDs - Green POWER LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED.
Interfaces/Ports
Interfaces/Ports
1 x USB
1 x DB-9 Serial
Modular Slots
4 x Communications Slot
Battery Information
Batteries
Sealed Lead Acid User-replaceable Hot-swappable
Backup/Run Time
0.08 Hour 500 W Full Load
0.28 Hour 250 W Half Load
Battery Life
26297.44 Hour to 52594.88 Hour
Battery Recharge Time
4 Hour
Environmental Conditions
Temperature
32°F (0°C) to 104°F (40°C) Operating
5°F (-15°C) to 122°F (50°C)
Humidity
0 to 95% Non-condensing Relative Humidity
Physical Characteristics
Color
Black
Form Factor
1U Tower/Rack Mountable
Power Cord/Cable
10 ft
Dimensions
17.50" Width x 11.75" Depth
Weight (Approximate)
18.80 lb
Miscellaneous
Package Contents
SMART500RT1U UPS System Mounting hardware Cabling for USB & DB9 monitoring and EPO switching PowerAlert unattended shutdown and UPS/Power monitoring software Warranty information and instruction manual
Additional Information
SMART500RT1U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts, plus network-grade AC surge suppression 500VA / 300 watt power handling capability compatibile with networking, telecom and other sensitive electronic devices Supports 1U rackmount installation in 2 or 4 post rack enclosures, upright tower placement also supported - mounting accessories included Large internal batteries offer runtimes of 17 minutes at half load (250VA / 150 watts) and 5 minutes at full load (500VA / 300 watts) Maintains regulated 120V nominal output during brownouts as low as 90V Includes 6 UPS-supported outlets, with one single outlet load bank that can be powered off and back on again via software interface. One additional surge-only outlet powers accessories not requiring battery support PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunities Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW) Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter Emergency Power Off (EPO) interface with cable Multi-function audible alarms and set of 5 front panel LEDs Network-grade AC surge suppression Attractive all-black color scheme UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary Two year warranty with $250,000 connected equipment insurance (USA & Canada only)
System Requirements
TYPICAL APPLCIATIONS: Ideal for protection of fileservers, network accessories and telecommunications equipment in server rooms, internetworking closets, co-location racks, kiosks and a variety of other locations. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.
Software Included
PowerAlert Software
Warranty
Standard Warranty
2 Year
Why Choose SoundPro?
Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.