Shure BLX14R Wireless Guitar System

The BLX14R Wireless Guitar System from Shure offers a sound solution that will give you free range of motion while performing onstage or in the studio.

This system is comprised of a BLX1 Bodypack Transmitter, a BLX4R Rack Mount Receiver, and a WA302 Guitar Cable. It also comes with accessories for single or dual rack mounting, two 1/4 Wave Antennas, a power supply, two AA batteries, and a bag for safe storage.

Shure BLX14R Features

• Wireless system offers untethered performance for guitar and bass players
• Great for musicians in the studio or onstage
• Simple setup and intuitive interface
• Single and dual rackmount kit offer flexibility in setup
• Up to 14 hours of battery life

• BLX1 Bodypack Transmitter1
• BLX4R Rack Mount Receiver1
• WA302 Guitar Cable1
• Single and Dual Rackmount Kit1
• 1/4 Wave Antennas2
• Zipper Bag1
• PS24 Power Supply1
• AA Batteries2

• System
  • Working Range: 91 m (300 ft) Line of Sight
  • Audio Frequency Response: 50 to 15,000 Hz
  • Total Harmonic Distortion Ref. ±33 kHz deviation with 1 kHz tone: 0.5%, typical
  • Dynamic Range: 100 dB, A-weighted, typical
  • Operating Temperature: -18°C (0°F) to 57°C (135°F)
  • Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output.
• BLX1 Transmitter
  • Audio Input Level
  • max: -16 dBVmaximum
  • min (0 dB): +10 dBVmaximum
  • Gain Adjustment Range: 26 dB
  • Input Impedance: 1 MΩ
  • RF Transmitter Output: 10 mW, typical
  • Dimensions: 4.33 in. X 2.52 in. X 0.83 in. (110 mm X 64 mm X 21 mm) H x W x D
  • Weight: 2.6 oz. (75 g), without batteries
  • Housing: Molded ABS
  • Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
  • Battery Life: up to 14 hours (alkaline)
• BLX4R Receiver
  • Output Impedance
  • XLR connector: 200 Ω
  • 6.35 mm (1/4") connector: 50 Ω
  • Audio Output Level (Ref. ±33 kHz deviation with 1 kHz tone)
  • XLR connector: –20.5 dBV (into 100 kΩ load)
  • 6.35 mm (1/4") connector: –13 dBV (into 100 kΩ load)
  • RF Sensitivity: -105 dBm for 12 dB SINAD, typical
  • Image Rejection: >50 dB, typical
  • Dimensions: 1.65 in. X 7.80 in.X 6.42 in. (42 mm X 198 mm X 163 mm) H x W x D
  • Weight without antennas: 2.2 lbs (998 g)
  • Housing: Molded ABS, steel
  • Power Requirements: 12–15 V DC @ 260 mA, supplied by external power supply (tip positive)

The Lightweight, Rugged BLX1 Bodypack Transmitter

A TQG connection on this transmitter enables connection with lavalier, headset, earset, and instrument mics, as well as guitar cables. Turn the transmitter on and off and control your gain with controls on the bodypack itself. Its group and channel selection buttons enable quick frequency matching with the receiver.

The Versatile BLX4R Wireless Receiver

The BLX4R includes a rack mount kit for permanent installation, allowing it to be easily incorporated into any setup. Its removable antennas enable quick distribution. It can expand to up to 12 mic channels, making it a great choice to start and grow your sound system. Setup is quick and easy with QuickScan frequency selection, which also provides improved linearity and frequency response.

More about Shure's BLX Wireless Systems

With consistent reliability across a wide variety of transmitters, receivers, and accessories, you’re sure to find a sound that works for you from this extensive selection of BLX gear. Whether you’re a performer or presenter, BLX Wireless is the ideal choice for producing stellar, dependable sound.

Go wireless with confidence using this specially engineered system that gives you pristine audio clarity without noise interference or disappointing dropouts. BLX series gear gives you the versatility and selection to pick and choose precisely the equipment to fit your needs whatever that venue or performance.