Set your sound stage up for success with Audio-Technica’s BP4073 microphone. Its length of just over 9 inches and weight of 3.5 ounces lets you mount this mic with next to no heft to the end of a fish pole or the top of a minicam. Designed with a narrow acceptance angle, the shotgun mic effectively works for long-distance pickup. These features and more make this condenser microphone well-suited to broadcasting, film/TV production, and theater sound reinforcement applications.
Broadcast-quality sound comes through in multiple elements of the BP4073. Despite the short length, BP4073 provides the same directivity as other microphones up to 50% longer than its 9.2 inches. Highly directional polar pattern provides crisp and intelligible audio within the narrow acceptance angle. Direct-coupled balanced output keeps signal clean even in high-output environments. Switchable 10 dB pad lowers the microphone’s sensitivity, allowing the mic to withstand higher SPLs. Another switch for choosing between flat response or low-frequency roll off allows greater frequency control. Phantom power at 48V is required to operate this condenser microphone.
Take broadcast-quality sound with you wherever you go using the BP4073. Structural-grade aluminum alloy makes the housing lightweight and durable. Accessories are included to help shift to the physical demand of different spaces, so the mic can be mounted to a mic stand, boompole, or camera-mount microphone holder. Design elements reproduce quality sound in environments with different demands of SPLs, ambient noise, and more.
Audio-Technica BP4073 Features
- Direct-coupled, balanced output ensures a clean signal even in high-output conditions
- Innovative acoustic design provides same directivity as mics up to 50% longer
- Rugged housing made of lightweight structural-grade aluminum alloy
- Switchable 80 Hz hi-pass filter & 10 dB pad
- Designed for broadcasting, film/TV production and theater sound reinforcement applications
- RoHS-compliant
- BP4073 Line + Gradient Condenser Microphone1
- Stand clamp for 5/8”-27 threaded stands1
- 5/8”-27 to 3/8”-16 threaded adapter1
- Windscreen1
- O-rings2
- SG2 Carrying case1
- Transducer TypeCondenser
- Polar Pattern Line + gradient
- Frequency Response 20 Hz - 20 kHz
- Output Impedance50 ohms
- Sensitivity-29 dBV/Pa (35.5 mV)
- Low Frequency Roll Off 80 Hz, 18 dB/octave
- Maximum Input Sound Level 141 dB SPL, 1 kHz at 1% T.H.D.; 151 dB SPL, with 10 dB pad (nominal)
- Noise 13 dB SPL
- Dynamic Range 128 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio 81 dB, 1 kHz at 1 Pa
- Phantom Power Requirements48V DC, 4.8 mA typical
- Switches Flat, roll-off; 10 dB pad (nominal)
- Connector3-Pin XLRM
- Dimensions 233 mm (9.17") long, 21 mm (0.83") maximum body diameter
- Weight 99 g (3.5 oz)
