Original ColorSource fixtures use an RGB-L array where the ‘B’ represents the use of blue LEDs. ColorSource Deep Blue replaces those blue LEDs with a deeper ‘Royal Blue’ (indigo) LED.
Original ColorSource fixtures can reach any color within the dark shaded triangle while the ColorSource Deep Blue fixtures can reach any color within the light shaded triangle. While much of these areas overlap, there is a portion of each range that can only be reached by the respective color arrays (A=Original, B=Deep Blue).
An LED luminaire crafted by lighting experts, the ColorSource PAR uses a balanced recipe of red, green, blue, a twist of lime, and an extra dash of red to provide a richness of color only possible from ETC LED luminaires. The extremely lightweight ColorSource PAR outputs bright, beautiful light, is easy to use with or without a lighting desk and lives up to ETC's high standards for quality.
ColorSource luminaires are factory-calibrated to ensure consistency. They feature a four-color mixing system offering bright, vibrant colors and perfectly-mixed pastels.
The thermal management algorithms built into every ColorSource fixture ensure that the colors you choose in rehearsal are the colors you get during the show.
ETC ColorSource PAR Deep Blue Features
- Available in black, white, and silver finishes (only black pictured)
- Homogenized optics
- Simple user interface with seven-segment display
- powerCON® in and thru
- 5-pin XLR
- LED droop compensation
- Optically calibrated
- Tour-ready, aluminum housing
- ColorSource PAR Deep Blue1
- Hanging yoke1
- Power cable1
- Source
- LED details: 40 Lumileds LUXEON® Z LED
- Max lumens: 2429
- Lumens per watt: 27.6
- L70 rating (hours to 70% output)*: 55,000 hours
- Color
- Colors used: red, green, indigo, lime
- Color temperature range: Color mixing
- Calibrated array: Yes
- Red shift: No
- Optical
- Beam angle range 15.3° (secondary lenses available for multiple beam-spread options)
- Gate size: N/A
- Aperture size: 7.5 in / 190 mm
- Pattern projection: No
- Pattern size: N/A
- Camera flicker control/Hz range: 1,200 Hz (default) ; 25,000 Hz (via RDM)
- Control
- Input method DMX512 via 5-pin XLR connector
- Protocols DMX512/RDM
- Modes (footprint) 4 modes, see page 7
- RDM configuration Yes
- UI type Seven-segment, three-button interface
- Local control Yes
- Onboard presets Yes (12)
- Onboard sequences Yes (5)
- Onboard effects No
- Fixture-to-fixture control Yes
- Notes 15-bit virtual dimming engine
- Electrical
- Voltage range 100–240 VAC 50/60 Hz
- Input method powerCON power in and thru
- Inrush
- 35A at 120V (First half-cycle)
- 49A at 240V (First half-cycle)
- Fixtures per circuit* (All measurements are for 120V, 60 Hz. Results may vary in different regions.)
- 9 (15 A power thru connector)
- 10 (R20 module or similar)
- Wattage typical
- 90W at 120V
- 89W at 240V
- Current draw
- 0.75A at 120V
- 0.40A at 240V
- Thermal
- Ambient operating temp: 0°–40°C (32°–104°F)
- Fan (controllable): Yes (No)
- Droop compensation: Yes
- dB range: 24.8 dBA average at 1 m
- BTUs/hour (RGB-L / DB): 307 / 303
- Physical
- Materials: Die-cast, all metal housing
- Color options: Black, white, silver, or custom color
- Mounting options: Yoke, floor stand yoke (available as an accessory)
- IP rating: IP20
- Weight: 3.77 kg (8.3 lbs)
- User interface: Seven-segment, three-button interface
- Warranty
- Fixture 5 years
- LED array 10 years
- Regulatory and Compliance: Approved regulatory standards
- cETLus Listed
- Conforms to UL 1573 Listed
- Conforms to UL 924 Listed
- Certified to CSA C22.2 No. 166 Listed
- Certified to CSA C22.2 No. 141 Listed
- CE Compliant
- EAC Compliant
- Dimensions (HxWxD)12.2x7.98x9.45" (310x203x240mm)
- Weight8.3 lbs (3.8kg)
- Shipping Weight10.1 lbs (4.6kg)
