
- Frequency Range (-10dB) 80 Hz – 20 kHz
- Frequency Response (±3 dB) 100 Hz – 20 kHz
- Coverage Pattern 120° x 120°
- Directivity Factor (Q) 8.1 (1 k – 16 kHz)
- Directivity Index (DI) 8.4 dB (1 k – 16 kHz)
- System Power Rating 250 W 2 hrs. 200 W 100 hrs
- Sensitivity (2.83V @ 1m) 94 dB (Ave. 100 Hz – 20 kHz)
- Maximum SPL (1m) Direct 8Ω: 118 dB (peaks of 124 dB) 200 W Tap: 117 dB
- Crossover Network 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF
- Nominal Impedance 8 ohms
- Transformer Taps 70V: 200W, 100W, 50W, 25W100V: 200W, 100W, 50W
- LF Driver Kevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil.
- HF Driver 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.
- HF Driver Protection Minimum audibility SonicGuard™ HF overload protection
- Enclosure ABS with Glass enclosure, heavily braced
- Attachment Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
- Grille Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
- Input Connection CE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36")
- Environmental IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs).
- Dimensions 300 x 300 x305 mm (11.8 x 11.8 x 12.0), cabinet 331 mm (13.0 in) including gland nut 359 mm (14.2 in) including bracket extending to back
- Colors Available in gray (similar to Pantone 420C) and black (-BK)
- Net Weight (each) 9.8 kg (21.5 lb), 11.6 kg (25.5 lb) with U-bracket
- Shipping Weight 14.1 kg (31.0 lb)
- Crossover Modes Passive
- Nominal LF Driver Impedance 8 ohms
- Suspension Attachment Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
Why Choose SoundPro?
Since 1973, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.