
- Frequency Range (-10dB) 47 Hz – 16 kHz
- Power Rating
- 240 W Continuous Program (2 hrs)
- 120W (480W peak), Continuous Pink Noise (2 hrs)
- 100W (400W peak) Continuous Pink Noise (100 hrs)
- Transformer Taps 70V: 60W, 30W, 15W & 7.5W 100V: 60W, 30W, 15W
- Frequency Response (±3 dB) 60Hz - 15 kHz
- Maximum Input Voltage 28.0 V
- Sensitivity 87 dB, 1W @ 1m (ave. 80Hz - 16kHz)
- Coverage Angle 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground).
- Directivity Factor (Q) 2.1
- Directivity Index (DI) 3.2 dB
- Maximum SPL (1m) 108 dB
- Impedance 8Ω (at 8Ω setting)
- Minimum Impedance 6.6Ω at 9.5kHz
- Insertion Loss <0.5 dB at any tap setting
- Thru Setting 8Ω nominal
- Crossover Type 2nd Order LPF on LF and 2nd Order HPF on HF
- Recommended Protective High-Pass 45 Hz for 8Ω operation, 24 dB/oct 80 Hz for 60W tap, 24 dB/oct 50 Hz for 30W, 7.5W, and 7.5W taps, 24 dB/oct
- Drivers
- LF: 200 mm (8.00 in) diameter LF driver, Kapton™ former, 38mm (1.5 in) voice coil, polypropylene cone and polyurethane surround.
- HF: 25mm (1.0 in) diameter HF driver Polyetherimide (PEI) dome.
- Enclosure LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.
- GrillePowder coated stainless steel.
- Outdoor Capability IP-56 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.
- Safety Agency UL1480, Transformer UL Recognized per UL1876, ROHS compliant.
- Input Connectors Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section)
- Wiring Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For Installation instructions, see Installation Guide (#IS-C80MLS).
- Colors Hunter Green, RAL6018
- Dimensions (HxWxD) 524x355x355mm (20.7x14x14")
- Net Weight (each) 7.8 kg (17 lb)
- Shipping Weight10.5 kg (23 lb)
- Installer-Supplied Required Tools22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.
Why Choose SoundPro?
Since 1973, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.