Specifications
Certifications
IP Rating
IP65
Corrosion Resistance
ISO 12944-6: 2018; C3 High, Test Regime ISO 9227, 240h
RoHS
Compliant
REACH
Compliant
WEEE
Compliant
Proposition 65
Compliant
FSC
Certified cardboard inlay and outer packaging
CB Certification/IECEE
IEC 62368-1
EU Safety
IEC 62368-1
EU EMC
EN 55032; EN 55035; EN 61000-3-2, EN 61000-3-3
US Safety
UL 62368-1
US EMC
FCC Part 15 Class B
Canadian Safety
CSA C22.2 No.62368-1
Canadian EMC
ICES-003 Class B
Australia/NZ
RCM
United Kingdom
UKCA
India
BIS IS 10322 (Part 5 / Section 1)
Dimensions
Length
1000 mm (39.4 in.)
Width
27 mm (1.1 in.)
Height (Without Diffuser/Lens)
37 mm (1.5 in.)
Height (With Included Square Diffuser)
51 mm (2.0 in.)
Weight
Product Weight
1.6 kg (3.5 lbs.)
Electrical
Nominal Input Voltage
48 V DC +/- 4%
Power Supply Options
P3 PowerPort 2000, P3 PowerPort 500 IP Rental, P3 PowerPort 500 IP Install, DCE PSU 240 IP or generic 48 V DC PSU
Power Consumption, Typical Full Power Mode
30.0 W
Power Consumption, Typical Half Power Mode
16.9 W
Power Consumption, Idle
3.3 W
Power Consumption, Hibernation
1.6 W
Performance
Luminous Output, Mixed White (Full Power)
2,300 lumens / m
Luminous Output, Red (Full Power)
640 lumens / m
Luminous Output, Green (Full Power)
1,940 lumens / m
Luminous Output, Blue (Full Power)
350 lumens / m
Luminous Output, Mixed White (Half Power)
1,250 lumens / m
Luminous Output, Red (Half Power)
320 lumens / m
Luminous Output, Green (Half Power)
970 lumens / m
Luminous Output, Blue (Half Power)
175 lumens / m
Luminous Intensity, Mixed White (Full Power)
830 cd / m
Luminance, Mixed White (Full Power)
27,666 nits (fixtures at 30 mm center-to-center)
CCT
Variable 1,800 K - 12,850 K (+/- 200 K)
CRI
>= 78
CQS
>= 74
TM-30 Rf (Fidelity Index)
>= 77
TM-30 Rg (Gamut Index)
>= 92
TLCI
>= 61
LED Refresh Rate
1,001 Hz or 4,004 Hz (selectable)
Efficacy (Max Output)
76.6 lm/W
Lumen-to-Weight Ratio
1438 lm/kg (657 lm/lbs.)
Minimum LED Lifetime
> 100,000 hours (to > 70% luminous output)
Optics
Pixel Pitch
10.00 mm
Pixel Quantity
100 RGBW pixels
LED Type
Single RGBW LED per pixel
Beam Angle, Half Peak (No Diffuser/Lens)
122x122 degrees
Field Angle, Tenth Peak (No Diffuser/Lens)
145x145 degrees
Beam Angle, Half Peak (Graze Lens)
24x84 degrees
Field Angle, Tenth Peak (Graze Lens)
51x130 degrees
Beam Angle, Half Peak (Blade Lens)
16x76 degrees
Field Angle, Tenth Peak (Blade Lens)
31x120 degrees
Controls
Control Protocols
Art-Net, RDM over Art-Net, sACN, and Martin P3
Protocol Detection
Automatic
DMX Modes
Compact, Basic, Extended 5 Segments, Extended 10 Segments, Extended 25 Segments, Extended 100 Pixels, Compact Direct, RGB, PixelMap 5 Segments, PixelMap 10 Segments, PixelMap 25 Segments, PixelMap 100 Pixels
DMX Channels
8, 14, 29, 44, 89, 314, 8, 3, 15, 30, 75 & 300
Multi-Universe Overflow
Yes, in all DMX Modes
16-bit Controllable Parameters
Dimming
Art-Net Compliance
Art-Net 1, 2, 3 and 4; including RDM over Art-Net
sACN Compliance
ANSI E1.31 - 2018
Martin P3 Compliance
P3 System Controller Software 6.1.0 or newer
Ethernet Transceiver
10/100Mbit
Firmware Update
Via Ethernet using Martin Companion or P3 System Controller
Local User Interface
Magnet Sensor to recall test patterns and reset fixture
Device Status Indication
Multi-color visual indication
P3 System Processing Depth
16 bits per color (64 bits per pixel)
P3 Frame Rate
Up to 60 frames/sec
P3 Latency
None between first and last fixture
Stand-Alone Max Scenes
20
Stand-Alone Controllable Parameters
All, including internal FX
Stand-Alone Synchronization
Yes, including synchronization across different fixture types
Construction
Housing Color
Matte Black
Housing Material
Aluminium
Cooling
Convection
Maximum Ambient Temperature
50 degrees C (122 degrees F)
Minimum Ambient Temperature
-20 degrees C (-4 degrees F)
Typical Heat Dissipation
102 BTU/hr. (calculated, +/- 10%)
Mounting
Channel for M6 captive nuts on back of fixture
Mounting Options
M6 bolts, sliding bracket, half coupler, spigot adapter, linear coupler, pivot coupler, parallel coupler, or floorstand
Maximum Vertical Column Height
6 fixtures
Orientation
Any
Connectivity
DC Power and Network Input
Cable tail with DCE hybrid connector (7-pin)
DC Power and Network Thru
Cable tail with DCE hybrid connector (7-pin)
Hot Plugging
Yes
Included Items
Square Diffuser
Yes
Square Smoked Diffuser
Yes
Cable Clip
2x
Safety Cable Attachment Eyelet
Yes
Documentation
Multi-Language Safety and Installation Manual
Identifiers
MPN
MAR-90357902
Why Choose SoundPro?
Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.