
Specifications
Electrical
Power Requirements
11–52 V DC[4] phantom power (IEC-61938), <2.0 mA
Audio
Polar Pattern
Hypercardioid
Output Impedance
115.0Ω
Sensitivity
open circuit voltage, @ 1 kHz, typical, -33.5 dBV/Pa[1] (21.1 mV)
Signal-to-Noise Ratio[3]
79.0 dB
Self Noise
equivalent SPL, A-weighted, typical, 15.0 dB
General
Transducer Type
Condenser
VP89L
40-20,000 Hz
VP89M
50-20,000 Hz
VP89S
65-20,000 Hz
2500Ω Load
132.0 dB SPL
1000Ω Load
128.5 dB SPL
Common Mode Rejection
20 to 20,000 Hz, ≥70.0 dB
Flat Response
100 Hz
Low Frequency Rolloff
200 Hz
Note
[1] 1 Pa=94 dB SPL, [2]THD of microphone preamplifier when applied input signal level is equivalent to cartridge output at specified SPL, [3]S/N ratio is the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted, [4]All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity.
Why Choose SoundPro?
Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.