The DAN-RX provides a simple way to take a stereo feed from a Dante network and convert it to analog audio for monitoring in any location. Balanced XLR outputs allow you to connect to professional audio equipment such as a mixing console, amplifier, or a pair of powered speakers. In addition, a local 3.5mm headphone output is equipped with its own level control to test audio before connection to the PA system or to monitor locally with headphones, making it useful in events that use personal monitor systems. The DAN-RX can be powered from an included external supply or any Power over Ethernet (PoE) network switch, and both of these options can be used simultaneously to provide redundancy for critical applications.
Radial DiNET DAN-RX Features
- Stereo analog output device for Dante networks
- Balanced XLR outputs for connection at mic or line level
- Headphone amplifier for personal monitoring
- 24bit/96kHz digital to analog conversion
- DiNET DAN-RX 2 Channel Dante Network Receiver1
- Three Year Warranty1
- Audio circuit type High current balanced active output device
- Number of channels 2
- Frequency response 20Hz-20kHz
- Dynamic range >100dB
- Gain +18dBu max @ 0dBFS
- Total harmonic distortion 0.007% @ -6dBFS
- Output Impedance 150Ω
- Sample Rate44.1kHz, 48kHz, 88.2kHz, and 96kHz
- Input Connectors 2x XLR male, 1x 3.5mm & 2x 1/4” headphone out
- Output Connectors 2x XLR male, 1x 3.5mm & 2x 1/4” headphone out
- Extras Bit Depth: 24 bit; Idle Channel Noise:-108dB; Channel Separation: >75dB; Power Consumption: 1.25W; Power over Ethernet (PoE): Class 1 IEEE 802.3af
- Construction 14-gauge steel
- Finish Durable powder coat
- Size (LxWxD) 121x6x147mm (4.5x2x6”)
- Power 15VDC 400mA (included) or PoE
- Conditions For use in dry locations only between 5°C and 40°C
