The DHR12 is a 2-way bi-amp powered loudspeaker equipped with a 12-inch woofer and a 1.4-inch HF driver, perfect for use as a main or utility speaker. Combining a 1000W amplifier and high-performance DSP with the same plywood construction found on our high-end DZR Series, the DHR12 offers best-in-class sound quality and durability.
Yamaha DHR12 Features
- Featuring a plywood cabinet that delivers a clear sound with minimal vibration
- Plywood enclosure with a polyurea coating for a robust, scratch resistant surface
- Compact size despite the 12-inch LF driver that provides excellent low frequency response
- Can be installed in a horizontal or vertical configuration with a rotatable HF horn offering the flexibility needed for installation in a wide range of environments
- Optional UB-DXRDHR12 U-bracket allows both for vertical or horizontal use
- Dual-angle pole sockets offer both 0° or a -7° down tilt
- Rigging points for use with eye bolts
- Proprietary FIR-X™ tuning, provides FIR filtering and corrective EQ, minimizing phase distortion
- DHR12 12-Inch Powered Speaker1
- Speaker type2-way, Bi-amped Powered Speaker, Bass-reflex
- Frequency range (-10dB)55 Hz - 20 kHz
- Coverage areaH90゚ x V90゚
- Crossover1.8 kHz: FIR-X tuning™ (linear phase FIR filter)
- Maximum Output Level (Measured peak, IEC noise@1m)129 dB SPL
- Components
- Diameter: 12" cone, Voice Coil: 2.5", Magnet: Ferrite
- Diaphragm: 1.75", Type: 1" throat coaxial compression driver, Magnet: Ferrite
- AmplifierClass-D
- Power Rating
- Dynamic: 1,000W (LF: 800W, HF: 200W) *1
- Continuous: 465W (LF: 400W, HF: 65W)
- CoolingFan cooling, 4 speeds
- Power consumption74W (1/8power), 18W (Idle)
- Power requirements100V, 100-120V, 220-240V, 110/127/220V (Brazil), 50/60 Hz
- A/D D/A Converters24 bit 48 kHz Sampling
- ProcessorsHPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF
- I/O connectorsINPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
- Cabinet materialPlywood
- FinishDurable Polyurea Painting, Black
- HandleSide x1
- Pole socketΦ35 mm x1 (Side)
- Floor Monitor Angle57°
- Dimensions (WxHxD)14.1x22.8x13.4" (500x343x454mm) (height includes rubber feet)
- Net weight42.3 lbs (19.2kg)
More about Yamaha's DHR Powered Speakers
DHR series loudspeakers ensure stunning sound quality and clarity with custom transducers driven by DSP-equipped Class-D power amplifiers. Part of this DSP functionality is FIR-X tuning, a process that simultaneously optimizes frequency and phase response while adjusting the time alignment between HF and LF transducers; this creates a smooth response around the crossover point and increases clarity. DSP protection functions are also vital with optimal limiting and monitoring of status for details in power supply, power amps, transducers, and more.
Another favorite feature of the DHR series is D-CONTOUR. This intelligent multi-band compressor gives you powerful and consistent sound throughout varying output levels by continuous monitoring and calculating. Manipulate D-CONTOUR specifically for FOH/MAIN mode or MONITOR mode.
Present on all the DHR options is a user-friendly 2-channel mixer. With this onboard mixer, you can select either of the two input channels (CH1 has a combo jack that accepts both XLR and TRS phones; CH2 can accept XLR or TRS phones and a pair of RCA pin jacks). Select either CH1+2 MIX to mix the signal of both channels or CH1 THRU to pass only CH1’s signal.
DHR speakers use the same plywood construction from Yamaha’s popular high-end DZR series. Using this material in the cabinet design delivers clear sound while minimizing vibration.